SIS SMS 2844-1975 Dust separating Test dust for dust collectors《粉尘分离 集尘器的粉尘测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF C20-012-1985 Recommendations of International Commission for conformity certification of electrical equipment (CEE) committee of testing stations《试验站电气设备(CEE)委员会合格认证用国际委员会建议》.pdf

NF C20-013-1998 Protection of persons and equipment by enclosures Probes for verification 《防护罩对人员和设备的保护 验证用探针》.pdf

NF C20-040-4-2006 Insulation coordination for equipment within low-voltage systems - Part 4 consideration of high-frequency voltage stress 《低压系统内设备的绝缘配合 第4部分 高频电压应力的计算》.pdf

NF C20-051-1985 Guide for the specification of permissible temperatures and temperature-rises for parts of electrical equipment in particular for terminals 《电气设备的零件(尤其是终端)用容许温度和温升规.pdf

NF C20-130-2004 Crimp-type copper or copper alloy non-insulated lugs for copper conductors - Requirements《铜导线用铜或铜合金卷曲式裸套管 要求》.pdf

NF C20-131-1974 Lugs with copper or aluminium flats and with conducting coating for aluminium conductors Requirements and dimensions 《铝导线用带导电镀层的有铝片或铜片的接头 要求和尺寸》.pdf

NF C20-150-1988 Dimensions of mechanical structures of the 482 6 mm (19 in) series Part 1 panels and racks 《482 6 mm (19 in) 系列机械结构尺寸 第1部分 护板与箱架》.pdf

NF C20-151-1988 Dimensions of mechanical structures of the 482 6 mm (19 in) series Part 2 cabinets and pitches of rack structures 《482 6 mm (19 in) 系列机械结构尺寸 第2部分 机箱与箱架结构间距》.pdf

NF C20-154-1996 Modular order for the development of mechanical structures for electronic equipment practices Part 2 sectional specification Interface co-ordination dimensions for.pdf