SIS SMS 3120-1973 0il resistant rubber sheeting for gaskets《耐油橡胶布垫圈》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 11989-2014 机床数控系统 术语与定义.pdf

JB T 11997.1-2014 卧式电解成形机床 第1部分 参数.pdf

JB T 11997.3-2014 卧式电解成形机床 第3部分 技术条件.pdf

JB T 11998.1-2014 数控电火花微孔加工机床 第1部分 精度检验.pdf

JB T 11998.2-2014 数控电火花微孔加工机床 第2部分 技术条件.pdf

JB T 11999.2-2014 数控往复走丝型多次切割电火花线切割机床 第2部分 技术条件.pdf

JB T 12001-2014 火电超临界及超超临界参数阀门 一般要求.pdf

JB T 12007-2014 高炉TRT系统用快速切断蝶阀.pdf

JB T 12019-2014 多参数食品现场快速检测仪通用技术条件.pdf