SIS SMS 3180-1974 Tapping screws General technical requirements《自攻螺丝 通用技术条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 3451-1-2012 Plastics－Determination of ash－Part 1：General methods《塑料 灰分的测定 第1部分 一般方法》.pdf

KS M ISO 3451-2-2007 Plastics－Determination of ash－Part 2：Poly(alkylene terephthalate) materials《塑料 灰分的测定 第2部分 聚对苯二甲酸亚苯基酯法》.pdf

KS M ISO 3451-3-2008 Plastics－Determination of ash－Part 3：Unplasticized cellulose acetate《塑料 灰份的测定 第3部分 未增塑的醋酸纤维素》.pdf

KS M ISO 3451-4-2008 Plastics－Determination of ash－Part 4：Polyamides《塑料 灰分的测定 第4部分 聚酰胺》.pdf

KS M ISO 35-2007 Natural rubber latex concentrate－Determination of mechanical stability《天然橡胶胶乳浓缩物 机械稳定性测定》.pdf

KS M ISO 3521-2010 Plastics－Unsaturated polyester and epoxy resins－Determination of overall volume shrinkage《塑料 不饱和聚酯和环氧树脂 总体积收缩率的测定》.pdf

KS M ISO 3549-2007 Zinc dust pigments for paints－Specifications and test methods《涂料用锌粉颜料规范和试验方法》.pdf

KS M ISO 3582-2010 Flexible cellular polymeric materials-Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame《柔性多孔聚合材料 在小火焰条件下小.pdf

KS M ISO 3633-2012 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)《建筑物内污废水排放系统用硬聚氯乙烯(PVC-.pdf