SIS SMS 340-1939 《管凸缘，固定凸缘的投掷铁管，标称压力：6》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 3402-1969 Specification for quality of vitreous china sanitary appliances《卫生陶瓷设备的质量规范》.pdf

BS 3403-1972 Specification for indicating tachometer and speedometer systems for industrial railway and marine use《工业、铁路和海运用指示转速表及速度表系统规范》.pdf

BS 3406-1-1986 Methods for determination of particle size distribution - Guide to powder sampling《粒度分布测定方法 第1部分 粉末取样指南》.pdf

BS 3407-1982 Guide for assessing coke screening plant《焦炭筛选设备的评定指南》.pdf

BS 3408-1992 Specification for tarpaulins《漆布规范》.pdf

BS 3409-1-1961 Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) - Diameters 1 4 in and over《金属丝螺纹镶件承受孔攻螺纹(统一标准粗牙螺纹和统一标准细牙螺纹)规范 第1部分 孔径1 4.pdf

BS 3409-2-1966 Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) - Diameters below 1 4 in《金属丝螺纹镶件承受孔攻螺纹(统一标准粗牙螺纹和统一标准细牙螺纹)规范 第2部分 孔径小于1 4英.pdf

BS 341-1-1991 Transportable gas container valves - Specification for industrial valves for working pressures up to and including 300 bar《可输气体容器阀门 第1部分 工作压力最大不超过300bar(包含300bar)用工业阀.pdf

BS 341-3-2002 Transportable gas container valves - Valve outlet connections《可运输气体容器的阀门 阀门出口接头》.pdf