SIS SMS 775-1964 《为螺丝设计的自由孔 UNC和UNF线》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4614-1992 八齿削平型直柄立铣刀.d=32～71mm.pdf

HB 4615-1992 三齿莫氏锥柄立铣刀.d=14～28mm.pdf

HB 4616-1992 三齿端刃过中心莫氏锥柄立铣刀.d=14～28mm.pdf

HB 4617-1992 四齿莫氏锥柄立铣刀.d=14～50mm.pdf

HB 4618-1992 六齿莫氏锥柄立铣刀.d=14～63mm.pdf

HB 4619-1992 八齿莫氏锥柄立铣刀.d=32～63mm.pdf

HB 4620-1992 四齿无端齿左旋莫氏锥柄靠模立铣刀.d=12～18mm.pdf

HB 4621-1992 六齿无端齿左旋莫氏锥柄靠模立铣刀.d=20～50mm.pdf

HB 4622-1992 带滚轮六齿莫氏锥柄靠模立铣刀.d=16～50mm.pdf