SIS SS 02 01 81-1985 General requirements for the acceptance of testing laboratories《验收测试实验室的一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 5743J-2003 Steel Corrosion and Heat-Resistant Bars and Forgings 15 5Cr - 4 5Ni - 2 9Mo - 0 10N Solution Heat Treated Sub-Zero Cooled Equalized and Over-Tempered (UNS S35500.pdf

SAE AMS 5744E-2003 Steel Corrosion and Heat-Resistant Bars and Forgings 15 5Cr - 4 5Ni - 2 9Mo - 0 10N Heat Treated 170 ksi (1172 MPa) Tensile Strength (UNS S35500)《热处理的 抗拉强度为170 k.pdf

SAE AMS 5745F-2003 Steel Corrosion and Heat-Resistant Bars and Forgings 16 5Cr - 4 5Ni - 2 9Mo - 0 10N Equalized and Over-Tempered (UNS S35000)《UNS S35000 含16 5Cr-4 5Ni-2 9Mo-0 10N.pdf

SAE AMS 5746F-2005 Alloy Corrosion and Heat-Resistant Bars and Forgings 15Cr - 45Ni - 4 1Mo - 4 1W - 3 0Ti - 1 0Al - 31Fe (D979) Consumable Electrode Vacuum Melted Solution and Pre.pdf

SAE AMS 5747D-2006 Nickel Alloy Corrosion and Heat-Resistant Bars Forgings and Rings 72Ni - 15 5Cr - 0 95Cb(Nb) - 2 5Ti - 0 70Al - 7 0Fe Solution Heat Treated Precipitation Hardena.pdf

SAE AMS 5749F-2014 Steel Corrosion-Resistant Bars Wire Forgings and Tubing 14 5Cr - 4 0Mo - 1 2V (1 10-1 20C) Premium Quality for Bearing Applications Double Vacuum Melted (UNS S42.pdf

SAE AMS 5754M-2007 Nickel Alloy Corrosion and Heat-Resistant Bars Forgings and Rings 47 5Ni - 22Cr - 1 5Co - 9 0Mo - 0 60W - 18 5Fe Solution Heat Treated (UNS N06002)《固溶热处理、7 5Ni 2.pdf

SAE AMS 5755G-2014 Nickel Alloy Corrosion and Heat-Resistant Bars Forgings and Rings 64Ni - 5 0Cr - 24 5Mo - 5 5Fe Solution Heat Treated (UNS N10004)《固溶热处理的含64Ni-5 0Cr-24 5Mo-5 5Fe.pdf

SAE AMS 5758J-2014 Alloy Corrosion-Resistant Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening .pdf