SIS SS 03 22 12-1983 Construction drawings - Drawing forms - Folding marks and folding《施工图绘制表格，折叠记号和折叠》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 10635-2000 Refractory products - Methods of test for ceramic fibre products《耐火制品 陶瓷纤维制品的试验方法》.pdf

BS ISO 10636-1995 Photography - Processing chemicals - Specification for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate《摄影技术 洗片化学制品 无水硫代硫酸钠和硫代硫酸钠五水合物规范》.pdf

BS ISO 10638-2017 Rubber Identification of antidegradants by gas chromatography mass spectrometry《橡胶 通过气相色谱法 质谱分析法识别抗降解剂》.pdf

BS ISO 10643-2009 Dimensions of accessories for cutting tools and their attachments《切削工具及其附件的配件尺寸》.pdf

BS ISO 10649-1-2013 Cutter arbors with parallel key and tenon drive General dimensions《带平面键和凸榫的刀杆 一般尺寸》.pdf

BS ISO 10649-3-2013 Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with 7 24 taper for automatic tool changer《带平键和榫驱动的刀杆 带自动工具更换装置及7 24锥.pdf

BS ISO 10649-4-2013 Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with 7 24 taper without automatic tool changer《带平键和榫驱动的刀杆 无自动工具更换装置的带.pdf

BS ISO 10649-5-2012 Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with polygonal taper interface with flange contact surface《带平键和榫驱动的刀杆.pdf

BS ISO 10649-6-2012 Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with modular taper interface with ball track system《带平面键和凸榫的刀杆 与轴承滚道系.pdf