SIS SS 11 03 31-1982 Hardness test - Brinell test - Indirect verification of testing machines using standardized blocks《硬度试验 布氏测试利用标准化模块的试验机间接检定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M2G401-B5-2007 ADHESIVES CYANOACRYLATE (CA) - TO BE USED WITH FORD WSS-M99P1111-A (SHOWN ON FORD WSS-M2G401-B1)《氰基丙烯酸酯（CA）胶粘剂 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M.pdf

FORD WSS-M2G401-B6-2007 ADHESIVES CYANOACRYLATE (CA) - TO BE USED WITH FORD WSS-M99P1111-A (SHOWN ON FORD WSS-M2G401-B1)《氰基丙烯酸酯（CA）胶粘剂 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M.pdf

FORD WSS-M2G401-B8-2007 ADHESIVES CYANOACRYLATE (CA) - TO BE USED WITH FORD WSS-M99P1111-A (SHOWN ON FORD WSS-M2G401-B1)《氰基丙烯酸酯（CA）胶粘剂 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M.pdf

FORD WSS-M2G401-B9-2007 ADHESIVES CYANOACRYLATE (CA) - TO BE USED WITH FORD WSS-M99P1111-A (SHOWN ON FORD WSS-M2G401-B1)《氰基丙烯酸酯（CA）胶粘剂 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M.pdf

FORD WSS-M2G408-A-2015 ADHESIVE HIGH-TACK GASKET PLACEMENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2G409-A-2002 ADHESIVE STRUCTURAL FAST CURING AIR DRY TO BE USED WITH FORD WSS-M99P1111-A 《结构用晾干式快速固化胶粘 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2G41-A1-2018 ADHESIVE MOISTURE CURING URETHANE TWO COMPONENT PRIMERLESS TO ELECTROCOAT HIGH MODULUS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2G410-A-2013 ADHESIVE WELDABLE RIVETABLE THERMAL CURE STRUCTURAL ALUMINUM TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2G410-A-2016 ADHESIVE WELDABLE RIVETABLE THERMAL CURE STRUCTURAL ALUMINUM TO BE USED WITH FORD WSS-M99P1111-A .pdf