SIS SS 11 45 01-1984 Non-destructive testing - Penetrant flaw detection《无损检测 渗透探伤》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 4359-1980 Slotted Pan Head Screws with Small Head and Full Dog Point《有槽小盘头全柱端螺钉》.pdf

CNS 4360-1980 Slotted Pan Head Screws with Small Head《有槽小盘头螺钉》.pdf

CNS 4361-1980 Slotted Shoulder Screws《有槽凸肩螺钉》.pdf

CNS 4362-1980 Slotted Cheese Head Screws for Fine Mechanics M 0 3 to M 1 4《精密用有槽平顶锥头螺钉（标称直径自0 3MM至1 4MM）》.pdf

CNS 4363-1980 Slotted Countersunk (Flat) Head Screws for Fine Mechanics M 0 4 to M 1 4《精密用有槽平顶埋头螺钉（标称直径0 4MM至1 4MM）》.pdf

CNS 4364-1981 Hexagon Head Fitting Bolts with Long Threaded Portion《六角头配合螺栓（具长螺纹部份）》.pdf

CNS 4365-1981 Hexagon Head Fitting Bolts with Short Threaded Portion《六角头配合螺栓（具短螺纹部份）》.pdf

CNS 4366-1987 Hexagon Bolts with Large Widths Across Flats for Steel Structures (Joints with Hightensile Prestressed Bolts)《六角头螺栓（具大对面宽度、高预力连接钢结构用）》.pdf

CNS 4367-1978 Knuckle Threads for Steel Sheet pieces (up to 0 5 mm Thickness and Appropriated Couplings Dimensions Tolerances)《圆螺纹（厚0 5MM以下之钢皮制品及其 配合螺纹）》.pdf