SIS SS 14 23 03-1985 Stainless steel《不锈钢》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D854-A4-2012 POLYPROPYLENE (PP) 30% GLASS FIBER REINFORCED MOLDING COMPOUND 50% MIN RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D854-B1-2013 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D854-B1-2017 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D857-A3-2001 STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED 16% GLASS FIBER REINFORCED MOLDING COMPOUND《苯乙烯-马来酸酐共聚物(SMA) 橡胶改性 16%玻璃纤维强化模塑料》.pdf

FORD WSS-M4D861-A3-2014 POLYPHTHALAMIDE (PPA) 33% GLASS FIBER REINFORCED COOLING AGENT RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D861-A4-2012 POLYPHTHALAMIDE (PPA) 35% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D865-A3-2012 POLYPROPYLENE (PP) HOMOPOLYMER 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND HIGH PERFORMANCE STRUCTURAL TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)均聚.pdf

FORD WSS-M4D865-A4-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% LONG GLASS FIBER AND MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)均聚物 30%长玻璃纤维和矿物增强模.pdf

FORD WSS-M4D865-B1-2013 POLYPROPYLENE (PP) 40% LONG GLASS FIBER REINFORCED GENERAL PURPOSE STRUCTURAL NON UV-STABLE TO BE USED WITH FORD WSS-M99P1111-A .pdf