SIS SS 14 25 23-1984 Steel for case hardening《表面硬化钢》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 21342 5-1987 Variable resistors Methods of measuring minimal resistance index of maximal attenuation and initial resistance jump《可变电阻器 电阻初跳变与最小电阻值测量方法》.pdf

GOST 21342 6-1975 Resistors variable Control methods for dynamic noise of moving system《可变电阻器 电阻器活动部分的位移噪声测量方法》.pdf

GOST 21342 7-1976 Thermal resistors Method of measuring resistance《热敏电阻器 电阻测量方法》.pdf

GOST 21342 8-1976 Thermal resistors Method of measuring resistance temperature coefficient《热敏电阻器 电阻温度系数测量方法》.pdf

GOST 21342 9-1976 Varistors Method of measuring voltage and current《压敏电阻器 电压和电流测量方法》.pdf

GOST 21347-1975 Bars for threading pipe cylindrical thread Diameters《圆柱管螺纹切制杆 直径》.pdf

GOST 21348-1975 Holes for threading pipe cylindrical thread Diameters《圆柱管螺纹切制孔 直径》.pdf

GOST 21349-1975 Bars for threading pipe taper screw thread Diameters《圆锥管螺纹切制杆 直径》.pdf

GOST 21350-1975 Holes for threading pipe taper screw thread Diameters《圆锥管螺纹切制孔 直径》.pdf