SIS SS 14 26 54-1987 Structural steel for cold forming SS-steel 26 54《冷锻结构钢 SS 不锈钢 26 54》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 3207-2001 Steel bars - Rolled or forged and machined round square flat and wide flat bars - Dimensions permissible deviations and machining allowances《钢筋 热轧或仿造和加工圆形;方形;扁平;宽.pdf

ONORM M 3215 Teil 1-1974 Broad strip steel hot rolled mild steel coils dimensions and masses permissible deviations《宽钢带 热轧低碳钢线圈 尺寸和质量 许可偏差》.pdf

ONORM M 3216-1974 Fiat strip steel hot rolled mild steel dimensions masses permissible deviations《平钢带 热轧低碳钢 尺寸，质量和容许偏差》.pdf

ONORM M 3221-1986 Steel bars hot rolled rounds for general and specialpurposes dimensions masses and permissible deviations《钢筋 特殊用途的通用热轧轮尺寸，质量和容许偏差》.pdf

ONORM M 3223-1986 Steel bars hot rolled rounds for bolts nuts and rivets dimensions masses andpermissible deviations《钢筋 螺栓，螺母和铆钉的热轧轮尺寸，质量和容许偏差》.pdf

ONORM M 3226-1969 Steel bars hot rolled square steel 《条钢 四角钢，尺寸，重量，许可偏差》.pdf

ONORM M 3227-1988 Steel bars hot rolled hexagonal steel for general purposes dimensions masses permissible deviations《钢筋 一般用途的热轧六角钢尺寸，质量和容许偏差》.pdf

ONORM M 3228-1969 Steel bars hot rolled hexagon steel for screws nuts etc 《条钢 螺栓、螺母和成型件的热轧六角钢尺寸，重量，许可偏差》.pdf

ONORM M 3230-1986 Steel bars hol rolledflats dimensions masses permissible deviations《钢筋 热轧平板尺寸，质量和容许偏差》.pdf