SIS SS 15 51 65-1979 Petroleum distillates and commercial aliphatic olefins Determination of bromine number Electrometric method《石油蒸馏物和商用脂肪烯烃 溴值的测定 电测法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 2559-1994 Specification for screwdrivers and screwdriver accessories《螺丝起子和螺丝起子附件规范》.pdf

BS 2559-3-1973 Specification for screwdrivers - Insulated screwdrivers《螺钉旋具规范 第3部分 绝缘螺钉旋具》.pdf

BS 2562-1979 Specification for cable boxes for transformers and reactors《变压器与电抗器用电缆箱规范》.pdf

BS 2567-1997 Specification for non-powered roller conveyors《非电动力驱动的钢辊式输送机规范》.pdf

BS 2571-1990 Specification for general-purpose flexible PVC compounds for moulding and extrusion《模制和挤压用的一般途的柔性聚氯乙烯化合物规范》.pdf

BS 2573-1-1983 Rules for the design of cranes - Specification for classification stress calculations and design criteria for structures《起重机设计规程 第1部分 结构分类、应力计算和设计准则规范》.pdf

BS 2573-2-1980 Rules for the design of cranes - Specification for classification stress calculations and design of mechanisms《起重机设计规程 第2部分 机械分类、应力计算和设计规范》.pdf

BS 2574-1-1991 Lower limb orthoses - Guide to the design and manufacture of lower limb orthoses excluding foot orthoses《下肢矫正器材 第1部分 下肢矫正器材(不包括脚矫正器材)设计和制造导则》.pdf

BS 2574-2-1994 Lower limb orthoses - Specification for hip knee and ankle joints for lower limb orthoses《下肢矫正法 第2部分 下肢矫正用髋部 膝和踝关节规范》.pdf