SIS SS 22 41 41-1984 Textile glass - Woven fabrics - Deter- mination of number of yarns per unit length of warp and weft《纺织玻璃 织物 单位经纬长度纱根数的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 7827-1981 Welding procedure qualijication tests《焊接 工艺质量测试》.pdf

ONORM M 7828 Teil 1-1984 Testing of filier metals by weld specimens arc welded test pieces mechanical and technological tests《金属焊接标本过滤器金属的测试 电弧焊接试件 机械和技术试验》.pdf

ONORM M 7828 Teil 2-1984 Testing of filier metals by weld specimens arc welded fest pieces tor the determination of the chemical analysis of the deposited weld-metal at low heat-in.pdf

ONORM M 7828 Teil 3-1986 Testing offilier metals by weld specimens test pieces for determination of hardness for surfacing《金属焊接标本过滤器金属的测试 堆焊硬度测定的试件》.pdf

ONORM M 7829-1983 Classification of imperfections in metallic fusion welds designations explanations《金属熔化焊焊缝缺陷分类 指定，解释》.pdf

ONORM M 7830-1985 Requirements for the quality of fusion welded joints on steel Classification《钢焊接接头的质量要求 分类》.pdf

ONORM M 7831-1987 Filier metals for arc welding of stainless and heat resistant steels Classification designation technical conditions of delivery marking of conformity 《电弧焊不锈钢和耐热钢.pdf

ONORM M 7832-1987 Filier metals for arc welding of creep- resisting steels Classification designation technical conditions of delivery marking of conformity《抗蠕变的电弧焊过滤器金属 分类，指定，交付技术.pdf

ONORM M 7835 Teil 1-1983 Welding destructive tests of welded joints tensile fest on butt welded test samples《焊接 焊接接头的破坏性试验 对接测试样本的拉伸测试》.pdf