SIS SS 35 AMD 1-1983 SPECIFICATION FOR TOILET SOAP《香皂规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 3678 15-2010 Type 15 15% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《15类 15%聚酰亚胺填充童式聚四氟乙烯(PTFE)模型或者半成品》.pdf

SAE AMS 3678 16-2010 Type 16 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《16型 15%聚酰亚胺填充原聚四氟乙烯(PTFE)模制品或挤压制品》.pdf

SAE AMS 3678 1B-2010 Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions《1型 原聚四氟乙烯(PTFE)模制品和挤压制品》.pdf

SAE AMS 3678 2A-2010 Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《2型 15%石墨填充原聚四氟乙烯(PTFE)模制品或挤压制品》.pdf

SAE AMS 3678 3A-2010 Type 3 15% Glass 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《3型 15%玻璃 5%二硫化钼填充原聚四氟乙烯(PTFE)模制品或挤压制品》.pdf

SAE AMS 3678 4A-2010 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《4型 25%玻璃填充原聚四氟乙烯(PTFE)模制品或挤压制品》.pdf

SAE AMS 3678 5A-2010 Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment《类型5的聚四氟乙烯(PTFE)着色模型或挤压件》.pdf

SAE AMS 3678 6A-2010 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《6型 60%青铜填充原聚四氟乙烯(PTFE)模制品或挤压制品》.pdf

SAE AMS 3678 7A-2010 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite《7类童式聚四氟乙烯(PTFE)模型或者半成品含有25%的碳纤维和石墨》.pdf