SIS SS 424 12 11-1986 Overhead line material - Clevis and tongue couplings dimensions《架空线材料 槽型连接尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4G311-A-2014 SEALER ELASTOMERIC TAPE FORM HEAT EXPANDING MAGNETIC TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M4G312-A-1990 SEALANT PAD PRESSURE SENSITIVE - PVC EXTERIOR《汽车外部用聚氯乙烯（PVC）压敏密封垫》.pdf

FORD ESB-M4G316-A1-1989 SEALER REPAIR TWO COMPONENT - EPOXY BASE - HIGH FLOW《高流动性环氧树脂基两组分维修密封剂》.pdf

FORD ESB-M4G316-A2-1989 SEALER REPAIR TWO COMPONENT - EPOXY BASE - LOW FLOW (Shown on ESB-M4G316-A1)《低流动性环氧树脂基两组分维修用密封剂 列于标准ESB-M4G316-A1上》.pdf

FORD ESB-M4G317-A-1990 SEALER REPAIR CHIP RESISTANT - SPRAYABLE TOPCOAT OVEN BAKE CYCLE《烘箱烘干面漆用可喷施、耐开裂的修复用密封剂》.pdf

FORD ESB-M4G322-A-1990 SEALER HOT MELT PREFORMED MAGNETIC PAINTABLE《热熔预成型磁性可油漆密封剂》.pdf

FORD ESB-M4G322-A-2016 SEALER HOT MELT PREFORMED MAGNETIC PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M4G331-A-2014 SEALER POLYOLEFIN HOT MELT THERMOSETTING EXTRUDED NON-FLOW TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M4G69-A-2014 POLYVINYL CHLORIDE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf