SIS SS 63 67 33-1985 Information processing - Data inter- change on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad 1 9 tpmm (4处.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 3093-1980 Two lay rope type LK-O construction 3x7(1+6) type TK construction 3x27(3+9+15) type TK construction 3x37(1+6+12+18) Dimensions《双层钢绳类型LK-O结构3x7(1+6) TK结构3x27(3+9+15) .pdf

GOST 3097-1980 Two lay rope type TK construction 8x16(0+5+11)+9 o c type LK-O construction 8x6(0+6)+9 o c Dimensions《ЛK-O型8×6(0+6)+9根、TK型8×16(0+5+11)+9根有机芯线结构的双捻的钢缆 品种》.pdf

GOST 31 0000 01-1990 Technological arrangement Basic provisions《工艺装备 基本规定》.pdf

GOST 31 010 01-1984 Machine retaining devices Terms and definitions《工艺装备标准体系 机床夹具 术语和定义》.pdf

GOST 31 0101 01-1989 Control parts handwheels swivel levers handles knobs General specifications《控制件手轮 旋转操纵杆 手柄 旋钮 通用规范》.pdf

GOST 31 0151 01-1990 Universal and specialized adjusting devices General specifications《通用和专用调整装置 通用规范》.pdf

GOST 31 0171 01-1991 Devices for metal cutting machine tools Parts and assembly units of general application General technical requirements《金属切削机床夹具 通用基件及装配单元 一般技术要求》.pdf

GOST 31 1001 01-1988 Workholding fixtures for CNC machine tools FMM FMS Basic parameters《数控机床和柔性生产系统用机床夹具 基本参数》.pdf

GOST 31 1066 01-1985 Attachments for metall-cutting machine tools Central readjustable mandrels with corrugated bushings for precision machining Basic parameters and dimensions《金属切.pdf