SIS SS 63 67 37-1983 Information processing - Data inter- change on 130 mm (5 25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on both .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSD-M9H133-A2-1992 FABRIC POLYPROPYLENE SPUN BONDED NON-WOVEN 55 G M2 (Shown on WSD-M9H133-A1)《55 G M2的聚丙烯（PP）纺编无纺布 列于标准WSD-M9H133-A1上》.pdf

FORD WSD-M9H133-A3-1992 FABRIC POLYPROPYLENE SPUN BONDED NON-WOVEN 70 G M2 (Shown on WSD-M9H133-A1)《70 G M2的聚丙烯（PP）纺编无纺布 列于标准WSD-M9H133-A1上》.pdf

FORD WSD-M9H133-A4-1992 FABRIC POLYPROPYLENE SPUN BONDED NON-WOVEN 90 G M2 (Shown on WSD-M9H133-A1)《90 G M2的聚丙烯（PP）纺编无纺布 列于标准WSD-M9H133-A1上》.pdf

FORD WSD-M9H134-B-1993 FABRIC BACKING POLYESTER KNITTED 70 GM M2《70 G M2的针织聚酯底布［替代 FORD ESD-M9H134-A］》.pdf

FORD WSD-M9H136-A-1993 FABRIC KNITTED《针织布》.pdf

FORD WSD-M9P8-A-2010 RUBBER PARTS INTERIOR AND EXTERIOR PERFORMANCE TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部和外部用塑料部件的性能 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M9P8-B］》.pdf

FORD WSE-M10A69-B-2009 SINTERED CARBON STEEL HOT FORMED TO BE USED WITH FORD WSS-M99P1111-A 《热成形烧结碳钢 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M10A69-C1 FORD WSS-M10A69-C1］》.pdf

FORD WSE-M10A75-A-2012 SINTERED IRON - MOLYBDENUM TO BE USED WITH FORD WSS-M99P1111-A 《烧结铁 钼 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSE-M10A76-A-2012 SINTERED IRON TUNGSTEN MOLYBDENUM VANADIUM CHROMIUM TO BE USED WITH FORD WSS-M99P1111-A 《烧结铁 钨 钼 钒 铬 与福特WSS-M99P1111-A 一起使用》.pdf