SIS SS 78 02 52-1984 Shipbuilding Gates in guard rails on deck《造船 在甲板上护栏门》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 9217.3-2005 硬质合金旋转锉 第3部分;圆柱形球头旋转锉(C型).pdf

GB T 9217.4-2005 硬质合金旋转锉 第4部分;圆球形旋转锉(D型).pdf

GB T 9217.5-2005 硬质合金旋转锉 第5部分;椭圆形旋转锉(E型).pdf

GB T 9217.6-2005 硬质合金旋转锉 第6部分;弧形圆头旋转锉(F型).pdf

GB T 9217.7-2005 硬质合金旋转锉 第7部分;弧形尖头旋转锉(G型).pdf

GB T 9217.8-2005 硬质合金旋转锉 第8部分;火炬形旋转锉(H型).pdf

GB T 9217.9-2005 硬质合金旋转锉 第9部分;60°和90°圆锥形旋转锉(J型和K型).pdf

GB T 9218-2005 35mm电影放映片夹 尺寸.pdf

GB T 9224-1998 直流周期计.pdf