SIS SS 78 09 42-1982 Shipbuilding Rudders - Bearings and couplings for spade rudders《造船 方向舵 铲型舵的轴承和联轴器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS 11 49 38-1986 Non-destructive testing Direct verification of black light sources《无损检测 不可见光光源的直接检定》.pdf

SIS SS 11 50 81-1982 Powder metallurgy - Hardmetals - Determination of the magnetization coercivity《粉末冶金 硬质合金 磁化抗磁性的测定》.pdf

SIS SS 11 70 11-1979 Sintered steel Determination of case hardened depth《烧结钢 表面硬化深度测定》.pdf

SIS SS 11 70 11-1982 Powder metallurgy - Sintered steel - Determination of case hardened depth《粉末冶金 烧结钢 锻造硬化深度的测定》.pdf

SIS SS 11 70 30-1980 Anodizing of aluminium and its alloys Determination of thickness of anodic oxide coatings Non-destructive measure ment by split-beam microscope 《铝及其合金的阳极氧化,阳.pdf

SIS SS 11 70 34-1980 Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance《铝及其合金的阳极氧化 通过测量导纳或阻抗对密封阳.pdf

SIS SS 11 71 08-1980 Copper Hydrogen embrittlement test《铜 氢脆测试》.pdf

SIS SS 11 71 10-1982 Corrosion of metals and alloys - Deter- mination of dezincification resistance of brass《金属和合金腐蚀，黄铜抗脱锌作用的测定》.pdf

SIS SS 11 73 01-1979 Powder metallurgical materials Testing International standards- validity as Swedish standard《粉末冶金材料 测试国际标准的有效性作为瑞典标准》.pdf