SIS SS 83 13 32-1988 Roof safety - Gangways steps and ladders on roofs - Functional requirements《顶板安全-屋顶上的过道，台阶和梯子功能要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 54604-1-1988 Testing of paper and board determination of starch content enzymatic analysis of native starch content《纸和纸板的检验 淀粉含量的测定 天然淀粉含量的酶分析》.pdf

DIN 54605-1993 Testing of pulp paper and board atomic absorption spectrometric determination of the cadmium content《纸浆试验 纸张和纸板 原子吸收光谱测定镉的含量》.pdf

DIN 54607-2014 Tissue paper and tissue products - Determination of dry colour abrasion of table decoration products - Abrasion test《卫生纸和其制品 桌饰产品干色磨损的测定 磨损试验》.pdf

DIN 5464-2010 Straight-sided splines - Heavy series《带直边的花键轴连接 重型系列》.pdf

DIN 5466-1-2000 Splined joints calculation of load capacity - Part 1 General basis《花键接头 载荷能力计算 第1部分 一般基础》.pdf

DIN 547-2006 Round nuts with drilled holes in one face《一端钻孔的圆螺母》.pdf

DIN 5471-1974 Machine Tools Spline Shafts and Spline Bore Profiles with 4 Splines Internal Centering Dimensions《机床 带4个键的花键轴和花键孔的剖面 内定心 尺寸》.pdf

DIN 5472-1980 Machine Tools Spline Shafts and Spline Bore Profiles with 6 Splines Internal Centering Dimensions《机床 带6个花键的花键轴和花键孔外形轮廓 内径中心、尺寸》.pdf

DIN 5473-1992 Logic and set theory symbols and concepts《逻辑和集论 符号和概念》.pdf