SIS SS 83 45 02-1980 Storage units SS2 for schools《学校存储单元SS2》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4G267-A2-1987 SEALER ELASTOMERIC TAPE FORM - WELDABLE HEAT EXPANDING (MEDIUM EXPANSION) - PRESSURE SENSITIVE《可焊受热膨胀型（中等膨胀）弹性体带状压敏密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4G267-A3-2014 SEALER - ELASTOMERIC TAPE FORM - WELDABLE HEAT EXPANDING (HIGH EXPANSION) - PRESSURE SENSITIVE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M4G279-A-2014 SEALER DIE CUT POLYOLEFIN HEAT CURING BONDABLE PATCH TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M4G285-A-2000 REPAIR SEALER AIR DRY ONE COMPONENT - EVA BASE - CLEAR《乙烯-乙酸乙烯共聚物（EVA）基单组分晾干式透明修补密封剂》.pdf

FORD ESB-M4G300-A-2000 SEALER INJECTION MOLDED POLYOLEFIN - HEAT EXPANDING - HIGH TEMPERATURE CURE《高温固化、热膨胀型聚烯径注塑密封剂》.pdf

FORD ESB-M4G300-B-2001 SEALER INJECTION MOLDED OR EXTRUDED POLYOLEFIN - HEAT EXPANDING - HIGH TEMPERATURE CURE - LOW EXPANSION《低膨胀性高温固化、热膨胀型注塑或挤塑聚烯径密封剂》.pdf

FORD ESB-M4G300-C-1993 SEALER INJECTION MOLDED OR EXTRUDED POLYOLEFIN HEAT EXPANDING FAST CURE《快速固化型热膨胀型注塑或挤塑聚烯径密封剂》.pdf

FORD ESB-M4G304-A-2014 SEALER ELASTOMER BASED - HOT MELT EXTRUDED - HEAT CURING - HIGH FLOW - NON TACK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M4G305-A-2007 SEALER ELASTOMER WELDABLE HOT APPLY NON EXPANDABLE TO BE USED WITH FORD WSS-M99P1111-A 《不膨胀热涂可焊弹性体密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf