SIS SS 83 90 30-1983 Quality of materials and workmanship - Assessment and classification《材料质量和工艺 评估和分类》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 18811-1980 Guide prisms Design and dimensons《导向棱柱体 结构及尺寸》.pdf

GOST 18812-1981 Sheet stamping dies Holders for guide posts with flute and guide bushes Design and dimensions《板材冲模用模具 导向柱及导向衬套用夹具》.pdf

GOST 18813-1981 Sheet stamping dies Protective caps Design and dimensions《板材冲模用模具 防护盖 结构及尺寸》.pdf

GOST 18815-1980 Air line holders Design and dimensions《空气管道支架 结构及尺寸》.pdf

GOST 18816-1980 Handling threaded dowel Design and dimensions《运输用螺纹销 结构及尺寸》.pdf

GOST 18817-1980 Handling lugs covering Design and dimensions《运输用搭接板销 结构及尺寸》.pdf

GOST 18818-1980 Bolsters with one aperture Design and dimensions《带单孔垫座 结构及尺寸》.pdf

GOST 18819-1980 Bolsters with two apertures Design and dimensions《带双孔垫座 结构及尺寸》.pdf

GOST 18820-1980 Bolsters with three apertures Design and dimensions《带三个孔垫座 结构及尺寸》.pdf