SIS SS 2381-1986 Slotted pan head tcrewt ISO metric tcrew thrttds《开槽盘头螺钉 ISO公制螺纹》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASME STP-PT-064-2013 EVALUATION OF FRACTURE PROPERTIES TEST METHODS FOR HYDROGEN SERVICE《氢作业用断裂性能试验方法评价》.pdf

ASME STP-PT-065-2013 BRANCH LEG STUDY FOR BIOPROCESSING EQUIPMENT《生物工艺设备的分支支柱研究》.pdf

ASME STP-PT-066-2014 DESIGN GUIDELINES FOR CORROSION EROSION AND STEAM OXIDATION OF BOILER TUBES IN PULVERIZED COAL-FIRED BOILERS《粉状煤燃烧锅炉中锅炉管腐蚀 侵蚀和蒸汽氧化应对设计指南》.pdf

ASME STP-PT-070-2014 DESIGN GUIDELINES FOR THE EFFECTS OF CREEP FATIGUE & CREEP-FATIGUE INTERACTION WITH DESIGN-BY-ANALYSIS AND NONDESTRUCTIVE INSPECTION ACCEPTANCE CRITERIA《根据经分析设.pdf

ASME STP-PT-070-2014 DESIGN GUIDELINES FOR THE EFFECTS OF CREEP FATIGUE & CREEP-FATIGUE INTERACTION WITH DESIGN-BY-ANALYSIS AND NONDESTRUCTIVE INSPECTION ACCEPTANCE CRITERIA《根据经分析设_1.pdf

ASME STP-PT-071-2014 STRESS INTENSITY FACTOR SOLUTIONS FOR INTERNAL CRACKS IN THICK-WALLED CYLINDER VESSELS《厚壁圆筒容器内部裂纹的应力强度因子解决方案》.pdf

ASME STP-PT-073-2014 STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES《金属管的应力强度因子和K因子校正》.pdf

ASME STP-PT-074-2015 Local Stresses in Nozzles in Shells and Formed Heads from External Loads《外载荷作用下壳体和成形头中的局部应力》.pdf

ASME STP-PT-075-2015 Effect of Thickness on the Transformation Behavior of Grade 91 Steel.pdf