SIS SS 3336-1979 Fittings for piping Shut-off underground valves for PN 16 Straight globe valves of Cu-alloy with male ends rising stem and resilient disk washer《管道配件 PN16截流地下阀 有.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D993-B1-2011 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定30%玻璃纤维增强聚酰胺(PA)6模塑材料 与福特WSS-M99P111.pdf

FORD WSS-M4D993-B1-2015 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D994-A-2004 POLYPROPYLENE (PP) COPOLYMER 15% GLASS FIBER REINFORCED COLOR PIGMENTED UV STABILIZED BLOW MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽.pdf

FORD WSS-M4D994-A2-2015 POLYPROPLYENE (PP) 15% GLASS FILLED BLOW MOLDABLE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D995-A-2005 THERMOPLASTIC POLYOLEFIN (TEO) MOLDING COMPOUND COLOR PIGMENTED UV STABILIZED FOR HIGH GLOSS (CLASS B ) MOLDED IN-COLOR APPLICATIONS EXTERIOR TO BE USED WI.pdf

FORD WSS-M4D996-A1-2011 POLYPROPYLENE (PP) COPOLYMER 20% TALC FILLED COLOR PIGMENTED UV STABILIZED BLOW MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《20%云母填充着色紫外.pdf

FORD WSS-M4D997-A-2007 POLYPHTHALAMIDE (PPA) 45% GLASS FIBER REINFORCED COOLING AGENT RESISTANT MOLDING COMPOUND - TO BE USED WITH FORD WSS-M99P1111-A 《耐冷却液的45%玻璃纤维增强的聚邻苯二甲酰胺(PPA.pdf

FORD WSS-M4D997-A-2017 POLYPHTHALAMIDE (PPA) 45% GLASS FIBER REINFORCED COOLING AGENT RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D998-A1-2006 RUBBER MODIFIED POLYVINYL CHLORIDE (PVC) ELASTOMER TO BE USED WITH FORD WSS-M99P1111-A 《橡胶改性的聚氯乙烯（PVC）弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf