SIS SS 3578-1987 Plastics pipes - Extraction of PVC-resin and determination of relativ viscosity viscosity number and K-value《塑料管 聚氯乙烯树脂提取和相对粘度、粘度数量和K值的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 9734B-2017 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK CRES AMS5643 3125-24 UNJF-3A.pdf

SAE AS 9741B-2005 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED PD SHANK CRES UNS S17400 140 KSI MIN 1900-32 UNJF-3A《CRES UNS S17400、KSI MIN 1900-32和UNJF-3A序列的PD柄、有孔的、.pdf

SAE AS 9742A-2005 Bolt Machine-Double Hexagon Extended Washer Head Drilled PD Shank CRES UNS S17400 140 KSI MIN 2500-28 UNJF-3A《机制螺栓 2500-28 UNJF-3A、最小140KSI、CRES UNS S17400、PD柄、钻孔.pdf

SAE AS 9751A-2014 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK AMS4967 (TI 6AL-4V) 2500-28 UNJF-3A《螺栓 机器-双六角头 扩充带垫圈螺钉头 PD杆 AMS 4967 250-28 UNJF-3A》.pdf

SAE AS 9759A-2014 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED PD SHANK AMS4967 (TI 6AL-4V) 1900-32 UNJF-3A《螺栓 机器-双六角头 扩充带垫圈螺钉头 钻孔的 PD杆 AMS 4967(TI 6AL-4V) 190-32 UNJ.pdf

SAE AS 976-1970 Coupling - Clamp Groove V-Band 6 400 9 400 11 400 Flange OD《法兰外径为11 400的6 400和9 400凹槽V波段钳耦合》.pdf

SAE AS 9760A-2014 Bolt Machine - Double Hexagon Extended Washer Head Drilled PD Shank Titanium AMS 4967 250-28 UNJF-3A.pdf

SAE AS 9761A-2014 Bolt Machine - Double Hexagon Extended Washer Head Drilled PD Shank Titanium AMS 4967 3125-24 UNJF-3A.pdf

SAE AS 977-1971 Coupling - Clamp Groove V-Band Forged 6 400 9 400 11 400 Flange OD《耦合 11 400 法兰外径9 400 锻造6 400 有槽V型带夹具》.pdf