SIS SS 436 15 23-1984 Electronic equipment for industry and trade - Immunity to radio frequency electromagnetic fields - Environmental classification and tests《工业和贸易中使用的电子设备 抗射频电磁场.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 24 1253-1971 Reduction sleeves with Morse taper shanks and inside ISO square《带莫氏锥柄及内部ISO角尺的过渡套》.pdf

CSN 24 1258-1986 Reduction sleeves for Morse taper shanks with damaged tenon《带被损坏的榫齿的莫氏锥柄用过渡套》.pdf

CSN 24 1261-1964 Reducing pieces with openings for securing wedges《用于系固楔块的带开口过渡件》.pdf

CSN 24 1278-1956 Clamping of metal-cutting tools Stripper punches for securing wedges《保障楔子的撞击器》.pdf

CSN 24 1279-1956 Clamping of metal-cutting tools Stripper wedges for taper shanks with driver《用于带卡盘的圆锥柄的楔子》.pdf

CSN 24 1300-1975 Chucks and chuck heads Survey《卡盘及卡盘封头调查》.pdf

CSN 24 1301-1986 Drilling machine chucks with key General regulations《带栓的钻机卡盘基本使用规则》.pdf

CSN 24 1309-1989 Three-jaw drill chucks with key《带栓的三爪钻头夹盘》.pdf

CSN 24 1310-1988 Three jaw drill chucks without key《无钥匙三爪钻头夹盘》.pdf