SIS SS 483 01 11-1984 Electric are welding equipment - Safety - Design《电气焊接设备的安全 设计》.pdf

相关资源

JIS C9300-6-2006 电弧焊接设备.第6部分有限工作时间手动金属弧焊电源.pdf

JIS C9300-12-2008 电弧焊接设备.第12部分焊接电缆用连接装置.pdf

SJ T 31374-1994 空调器生产用自动焊接设备完好要求和检查评定方法.pdf

SJ T 10480-1994 导丝焊接设备通用技术条件.pdf

SJ T 31374-1994 空调器生产用自动焊接设备完好要求和检查评定方法.pdf

GB T 2550-2016 气体焊接设备 焊接、切割和类似作业用橡胶软管.pdf

GB T 2550-2007 气体焊接设备 焊接、切割和类似作业用橡胶软管.pdf

GB T 25313-2010 焊接设备电磁场检测与评估准则.pdf

GB T 25312-2010 焊接设备电磁场对操作人员影响程度的评价准则.pdf

STAS 11715-1987 MIG MAG SEMIMECHANIZED WELDING EQUIPMENT Basic parameters《MIG MAG半机械化焊接设备 基本参数 》.pdf

猜你喜欢

BS EN 15410-2011 Solid recovered fuels Methods for the determination of the content of major elements (Al Ca Fe K Mg Na P Si Ti)《固体回收燃料 主要元素(Al Ca Fe K Mg Na P Si Ti)含量的测定方法》.pdf

BS EN 15411-2011 Solid recovered fuels Methods for the determination of the content of trace elements (As Ba Be Cd Co Cr Cu Hg Mo Mn Ni Pb Sb Se Tl V and Zn)《固体回收燃料 微量元素(As Ba Be C.pdf

BS EN 15413-2011 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample《固体回收燃料 利用实验室样品制备试验样品的方法》.pdf

BS EN 15414-3-2011 Solid recovered fuels Determination of moisture content using the oven dry method Moisture in general analysis sample《固体再生燃料 烘炉法测定含水量 一般分析样的水分》.pdf

BS EN 15415-1-2011 Solid recovered fuels Determination of particle size distribution Screen method for small dimension particles《固体回收燃料 粒度分布测定 小尺寸颗粒筛选法》.pdf

BS EN 15415-2-2012 Solid recovered fuels Determination of particle size distribution Maximum projected length method (manual) for large dimension particles《固体再生燃料 粒度分布测定 最大化投影长度方法(.pdf

BS EN 15415-3-2012 Solid recovered fuels Determination of particle size distribution Method by image analysis for large dimension particles《固体再生燃料 粒度分布测定 大尺寸颗粒度图像分析法》.pdf

BS EN 15416-1-2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Long-term tension load test perpendicular to the bond line at varyl.pdf

BS EN 15416-3-2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Creep deformation test at cyclic climate conditions with specimens.pdf