IRAM 1100-1948 《溶剂 颜色试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A779 A779M-2005 Standard Specification for Steel Strand Seven-Wire Uncoated Compacted Stress-Relieved for Prestressed Concrete《预应力混凝土用应力消除未涂覆密实七股钢丝绞绳标准规格》.pdf

ASTM A779 A779M-2010 Standard Specification for Steel Strand Seven-Wire Uncoated Compacted Stress-Relieved for Prestressed Concrete《预应力混凝土用应力消除未涂覆密实七股钢丝绞绳标准规范》.pdf

ASTM A779 A779M-2012 Standard Specification for Steel Strand Seven-Wire Uncoated Compacted for Prestressed Concrete《预应力混凝土用未涂覆密实七股钢丝绞绳标准规格》.pdf

ASTM A779 A779M-2016 Standard Specification for Steel Strand Seven-Wire Uncoated Compacted for Prestressed Concrete《预应力混凝土用致密性无镀层七股钢绞线的标准规格》.pdf

ASTM A780 A780M-2009 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings《热浸镀锌涂层局部未涂覆面积和损害的修补用标准惯例》.pdf

ASTM A780 A780M-2009(2015) Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings《修整热浸镀锌涂层损坏和未涂覆区域的标准实践规程》.pdf

ASTM A780-2001(2006) Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings《热浸镀锌层的损坏区域及无覆层区域的检修标准实施规程》.pdf

ASTM A781 A781M-2006 Standard Specification for Castings Steel and Alloy Common Requirements for General Industrial Use.pdf

ASTM A781 A781M-2008 Standard Specification for Castings Steel and Alloy Common Requirements for General Industrial Use《一般工业用钢铸件及合金铸件通用要求的标准规范》.pdf