SIS SS IEC 402-1985 Acoustics - Simplified method for pressure calibration of one-inch condenser microphones by the reciprocity technique《音响效果 采用互易技术进行的1英寸标准电容器麦克风压力校准的简单方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS51972 REV A-1969 NUT PLAIN HEXAGON-STEEL CORROSION RESISTING 300 SERIES PASSIVATED UNF-2B《UNF-2B钝化300系列抗腐蚀钢六角形普通螺帽》.pdf

DLA MS51988 REV B (1)-1996 NUT SELF-LOCKING FLANGED PREVAILING TORQUE STEEL CADMIUM UNC AND UNF《UNC及UNF镉钢流行扭矩折边自锁螺帽》.pdf

DLA MS51988 REV B NOTICE 1-2000 NUT SELF-LOCKING FLANGED PREVAILING TORQUE STEEL CADMIUM UNC AND UNF《UNC及UNF镉钢流行扭矩折边自锁螺帽》.pdf

DLA MS51988 REV B VALID NOTICE 2-2005 NUT SELF-LOCKING FLANGED PREVAILING TORQUE STEEL CADMIUM UNC AND UNF《UNC及UNF镉钢流行扭矩折边自锁螺帽》.pdf

DLA MS51988 REV B-1970 NUT SELF-LOCKING FLANGED PREVAILING TORQUE STEEL CADMIUM UNC AND UNF《UNC及UNF镉钢流行扭矩折边自锁螺帽》.pdf

DLA MS51993 REV B-2012 INSERT SCREW THREAD-LOCKED IN RING LOCKED SERRATED HIGH STRENGTH.pdf

DLA MS51994 REV A VALID NOTICE 1-2001 HOLE PREPARATION-RING LOCKED INSERTS AND STUDS STANDARD DIMENSIONS FOR《标准尺寸环形锁定嵌块及柱头螺栓打孔》.pdf

DLA MS51994 REV A-1988 HOLE PREPARATION-RING LOCKED INSERTS AND STUDS STANDARD DIMENSIONS FOR《标准尺寸环形锁定嵌块及柱头螺栓打孔》.pdf

DLA MS51996 REV A (1)-2002 HOLE-PREPARATION-RING LOCKED INSERTS AND STUDS HIGH STRENGTH STANDARD DIMENSIONS FOR《标准尺寸高强度环形锁定嵌块及柱头螺栓打孔》.pdf