SIS SS IEC 547-1986 Nuclear instrumentation Modul r plug-in unit and standard 19-inch r ck mounting unit based on NIM standard《核检测仪表 基于NIM标准（用于核电子仪器）的插件单元和19英寸标准机架安装单元 　 　》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 61249-2-1-2005 en Materials for printed boards and other interconnecting structures Part 2-1 Reinforced base materials clad and unclad Phenolic cellulose paper reinforced lamina.pdf

EN 61249-2-10-2003 en Materials for printed boards and other interconnecting structures Part 2-10 Reinforced base materials clad and unclad Cyanate ester brominated epoxide modifie.pdf

EN 61249-2-11-2003 en Materials for printed boards and other interconnecting structures Part 2-11 Reinforced base materials clad and unclad C Polyimide brominated epoxide modified .pdf

EN 61249-2-12-1999 en Materials for Printed Boards and Other Interconnecting Structures Part 2-12 Sectional Specification Set for Reinforced Base Materials Clad and Unclad - Epoxid.pdf

EN 61249-2-13-1999 en Materials for Printed Boards and Other Interconnecting Structures - Part 2-13 Sectional Specification Set for Reinforced Base Materials Clad and Unclad - Cyan.pdf

EN 61249-2-18-2002 en Materials for Printed Boards and Other Interconnecting Structures - Part 2-18 Reinforced Base Materials Clad and Unclad - Polyester Non-Woven Fibreglass Reinf.pdf

EN 61249-2-19-2002 en Materials for Printed Boards and Other Interconnecting Structures Part 2-19 Reinforced Base Materials Clad and Unclad - Epoxide Cross-Plied Linear Fibreglass-.pdf

EN 61249-2-2-2005 en Materials for printed boards and other interconnecting structures Part 2-2 Reinforced base materials clad and unclad C Phenolic cellulose paper reinforced lami.pdf

EN 61249-2-21-2003 en Materials for printed boards and other interconnecting structures Part 2-21 Reinforced base materials clad and unclad Non-halogenated epoxide woven E-glass re.pdf