SIS SS IEC 656-1981 Nuclear instrumentation Test procedures for high-purity germanium detectors for X and gamma radiation《核检测仪表 高纯度X及γ射线锗探测器测试程序》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 2402-2014 Aerospace Series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D = 10 mm German and English version EN 2402 2014《航空航天系列 耐热镍基合金NiCr20Co3Fe3 退火.pdf

DIN EN 241-2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method German version EN 241 2000《液体石油产品 钠含量测定 原子吸收分光光度法》.pdf

DIN EN 2413-1995 Aerospace series - Bolts shouldered thin hexagonal head close tolerance shank short thread in alloy steel cadmium plated - Classification 1100 MPa (at ambient temp.pdf

DIN EN 2422-2006 Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm ＜ a ≤ 120 mm German and English version EN 2422 2005《航空航天系列 铝合金AL-P2124-T351 板材 25mm a≤120mm》.pdf

DIN EN 2424-2008 Aerospace series - Marking of aerospace products German and English version EN 2424 2008《航空航天系列 航空航天产品的标记》.pdf

DIN EN 2428-1995 Aerospace series - Ethylen-propylene rubber (EPM EPDM) - Hardness 50 IRHD German version EN 2428 1995《航空航天系列 乙丙橡胶(EPM EPDM) 硬度为 50 国际橡胶硬度标度 德文版本 EN 2428 1995》.pdf

DIN EN 2429-1995 Aerospace series - Ethylen-propylene rubber (EPM EPDM) - Hardness 60 IRHD German version EN 2429 1995《航空航天系列 乙丙橡胶(EPM EPDM) 硬度为 60 国际橡胶硬度标度硬度硬度硬度 德文版本 EN 2429 1995.pdf

DIN EN 2430-1995 Aerospace series - Ethylen-propylene rubber (EPM EPDM) - Hardness 70 IRHD German version EN 2430 1995《航空航天系列 乙丙橡胶(EPM EPDM) 硬度为 70 国际橡胶硬度标度硬度硬度 德文版本 EN 2430 1995》.pdf

DIN EN 2431-1995 Aerospace series - Ethylen-propylene rubber (EPM EPDM) - Hardness 80 IRHD German version EN 2431 1995《航空航天系列 乙丙橡胶(EPM EPDM) 硬度为 80 国际橡胶硬度标度硬度硬度 德文版本 EN 2431 1995》.pdf