SIS SS IEC 666-1986 Insulating oils - Detection and determination of specified anti-oxidant additives in insulating oils《绝缘油 指定绝缘油抗氧添加剂的检查与测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65435-1989 Aerospace sleeves for fasteners technical specification《航空航天 紧固件用衬套 技术规范》.pdf

DIN 65436-1989 Aerospace standard quality (STQ) and disc quality (DQ) of titanium and titanium alloys requirements and tests《航空航天；钛和钛合金的标准件质量(STQ)和圆盘质量(DQ) 要求和试验》.pdf

DIN 65438-1993 Aerospace bihexagonal head bolts close tolerance with MJ-thread short thread length in titanium alloy nominal tensile strength 1100 MPa for temperatures up to 315 C《.pdf

DIN 65439-1984 Aerospace bihexagonal head bolts close tolerance with MJ-thread medium thread length in steel nominal tensile strength 1250 MPa for temperatures up to 235 C《航空和航天 MJ.pdf

DIN 65440-1984 Aerospace bihexagonal head bolts close tolerance with MJ-thread medium thread length in corrosion resisting steel nominal tensile strength 1250 MPa for temperatures .pdf

DIN 65441-1984 Aerospace bihexagonal head bolts close tolerance with MJ-thread medium thread length in steel nominal tensile strength 1550 MPa for temperatures up to 235 C《航空和航天 带M.pdf

DIN 65442-2016 Aerospace - bihexagonal head bolts close tolerance with medium-length MJ thread corrosion resisting nickel alloy - nominal tensile strength 1 550 MPa for temperature.pdf

DIN 65443-1984 Aerospace bihexagonal head bolts close tolerance with MJ-thread medium thread length in steel nominal tensile strength 1800 MPa for temperatures up to 235 C《航空和航天 带M.pdf

DIN 65444-1993 Aerospace rivets 100 countersunk head nickel alloy metric series《航空航天 米制系列镍合金100沉头铆钉》.pdf