SIS SS-EN 60 901-1991 Single-capped fluorescent lamps - Safety and performance requirements《单头荧光灯 安全和性能要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GMW GMW16457-2011 Non-Propriety (NP) Point for External Metric Thread Coarse Pitch Fasteners Issue 1 English《外部米制螺纹大螺距紧固件的不适当(NP)点 第1次出版(英文版本)》.pdf

GMW GMW16458-2012 Metric Hexagon Bolts with Heavy Flange and M-Point Product Grade A Issue 1 Englsih.pdf

GMW GMW16490-2011 Polyolefin Alloy - Weather Resistant 275 MPa Flexural Modulus Injection Molding Grade Issue 1 English《耐候275 MPa挠曲模量的喷射模塑等级聚烯烃合金 第1次出版(英文版本)》.pdf

GMW GMW16521-2011 Poly-N-methylmethacrylimide Issue 1 English《聚N－甲基甲基丙烯酰亚胺 第1次出版(英文版本)》.pdf

GMW GMW16530-2011 Summary Document for GM Powertrain Requirements English Issue 1《通用汽车动力系统要求的总结文件 第1次出版(英文版本)》.pdf

GMW GMW16535-2011 Metallurgical and Mechanical Properties of Wheel Bolts and Studs Issue 1 English《轮毂螺栓和螺柱的冶金和机械性能 第1次出版(英文版本)》.pdf

GMW GMW16536-2011 Pumpable Sealer Between Flanges of Welded Structures - Steel Acceptance Criteria and Repair Procedures Issue 1 English《焊接结构凸缘之间可泵送的密封层 钢验收标准和维修程序 第1次出版(英文版本)》.pdf

GMW GMW16537-2012 Metal Bonding Structural Adhesive Acceptance Criteria and Repair Procedures - Welded Bonded Rivet Bonded and Bonded Structures Issue 2 English《焊接粘合 铆钉粘合和粘合结构的金属粘合.pdf

GMW GMW16546-2011 Effect of Metal Lubricants on Paint Pretreatment Issue 1 English《金属润滑剂对涂料预处理的影响 第1次出版(英文版本)》.pdf