SIS SS-IEC 455-1991 Insulating materials - Specification for solventless polymerisable resinous compounds usedfor electrical insulation《绝缘材料 电气绝缘用无溶剂可聚合树脂复合物规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD FLTM BO 120-04-2007 ADHESION RESISTANCE OF MIRROR BUTTON BRACKETS《后视镜底座的耐粘附性》.pdf

FORD FLTM BO 120-3-2001 DISTORTION IN FLAT MIRRORS.pdf

FORD FLTM BO 121-01-2015 DETERMINATION OF SEAT FOAM PROPERTIES IN COMPRESSION.pdf

FORD FLTM BO 124-04-2001 DETERMINATION OF MOISTURE IN POLYVINYL BUTYRAL BY GRAVIMETRIC DESICCATION (Replaces FLTM BO 024-04)《重力脱水法测定聚乙烯醇缩丁醛中的水分含量 替代FLTM BO 024-04［替代 FORD FLTM BO 0.pdf

FORD FLTM BO 127-03-2006 STRESS CRACKING TEST FOR PLASTICS《塑料的应力开裂试验》.pdf

FORD FLTM BO 127-03-2016 STRESS CRACKING TEST FOR PLASTICS.pdf

FORD FLTM BO 127-03-2017 STRESS CRACKING TEST FOR PLASTICS.pdf

FORD FLTM BO 129-01-2001 WATER IMMERSION - DIMENSIONAL STABILITY OF ELASTOMERS AND PLASTICS (Replaces FLTM BO 029-01)《弹性体材料和塑料的水浸尺寸稳定性 替代FLTM BO 029-01［替代 FORD FLTM BO 029-01］》.pdf

FORD FLTM BO 129-02-2001 WATER ABSORPTION - ELASTOMERS AND PLASTICS (Replaces FLTM BO 029-02)《弹性体和塑料的吸水性 替代FLTM BO 029-02［替代 FORD FLTM BO 029-02］》.pdf