SIS SS-ISO 1496-5-1992 Series 1 freight containers Specification and testing Part 5 Platform and platform-based containers《系列1货运集装箱 规格和试验 第5部分：平台和基于平台的集装箱》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D932-A1-2014 POLYPROPYLENE (PP) COPOLYMER BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D932-B1-2014 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND BLOW MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D932-B1-2016 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND BLOW MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D932-B1-2017 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND BLOW MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D932-B2-2014 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND INJECTION MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D932-B1).pdf

FORD WSS-M4D932-B2-2016 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND INJECTION MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D932-B1).pdf

FORD WSS-M4D932-B2-2017 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND INJECTION MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D932-B1).pdf

FORD WSS-M4D933-A1-2006 POLYAMIDE 6 (PA6) IMPACT MODIFIED HEAT STABILIZED EXTRUSION MOLDING COMPOUND TO BE USED WITH WSS-M99P1111-A 《受热稳定的冲击改性聚酰胺6（PA6）挤塑成型料 与标准FORD WSSS-M99P111.pdf

FORD WSS-M4D934-A1-2010 ETHYLENE METHACRYLIC ACID IONOMER (EMA) MODIFIED 3% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用3%玻璃纤维增强的改性.pdf