SIS SS-ISO 2150-1982 Continuous mechanical handling equip- ment for unit loads - Overhead twin rail chain conveyors (power and free) - Safety code《单位载荷的连续式机械装卸设备 架空 双轨链式输送机（积放式）安全规.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 6675 8-1976 UNPLASTICIZED POLYVINYL CHLORIDE PIPES Determination of the resistance to externai blows《硬质聚氯乙烯管 防外部损伤测定 》.pdf

STAS 6679 1-1985 METAL CUTTING MACIIINE TOOI.S GEOMETRICAL ACCURACY TESTS General technicnl rrgnirerments《金属切割机床 几何精确测试 通用技术要求 》.pdf

STAS 6679 10-1985 Metal cutting machine-tools CHECK METHOD OF THE ROTA- TION AXIS EQUIDISTANCE OF THE WORKING ELEMENT TO A REFERENCE BASIS《金属切割机床 旋转轴工作部件到一个参考依据点等距离测试方法 》.pdf

STAS 6679 11-1985 Metal-cutting machinc-tools HECKING METHOD SQUARE- ESS OF A MOVING ELEMENT IRECTION OF MOVEENT TO AN XIS ORPLANE《金属切割机床 一个活动部件朝向到一个平面或一条轴的直角度测定 》.pdf

STAS 6679 12-1985 Metal cutting machine-tools COMPLEX CHECKING METHODS OF THE STRAIGHTNESS AND PERPENDICULAR ALIGNEMENT OF A WORKING ELEMENT MOVTNG DIRECTION AGAINST A PLANE OR AN .pdf

STAS 6679 13-1985 Metal-cutting machine-tools HECKING METHODS OF SQUARE- ESS OF THE PATHES OF TWO OVABLE PARTS《金属切割机床 两个活动部件直角路线的检测方法 》.pdf

STAS 6679 14-1985 Metal cutt ing machinc-tools METHODS OF TESTING THE QUARENNESS OF AN AXIS TO HE FRONT SURFACE《金属切割机床 一个轴与一个面垂直度的检测方法 》.pdf

STAS 6679 15-1985 Metal-cutting machinc-tools ADIAL EUN-OUT HBCKING TEST《金属切割机床 径向跳动实验 》.pdf

STAS 6679 16-1985 Metal cutting machine-tools HECKING METHODS OR AXIAL RUN-OUT《金属切割机床 轴向摆差测定方法 》.pdf