SIS SS-ISO 4520-1982 Chromate conversion coatings on electroplated zinc and cadmiumcoatings《电镀锌及镉涂层上的铬酸盐转化涂层》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS K T3 178-1985 GO screvv plug gauges for iSO Metric Screvv Threads above 40 to and including 100 mm nominal dia- meter《ISO 米制螺纹，GO 螺旋塞计量器 大于40到100毫米包括 100毫米 公称口径》.pdf

JUS K T3 179-1985 NOT GO screvv plug gauges for ISO Metric Screw Threads above 40 to and including 100mm nominal diameter《ISO 米制螺纹，NOT GO 螺旋塞计量器大于40到100毫米包括 100毫米 公称口径》.pdf

JUS K T3 181-1985 GO screvv ring gauges for ISO Metric Screvv Threads from 1 to 100 mm nominal diameter《ISO 米制螺纹，GO 螺旋塞计量器大于1到100毫米 公称口径》.pdf

JUS K T3 182-1985 NO TGO screvv ring gauges for ISO Metric Screw Threads from 1 to 100 mm nominal diameter《ISO 米制螺纹NO TGO 螺纹环规1到 100 毫米 公称口径》.pdf

JUS K T3 950-1983 Handles for gauging members with taperlock 1 50 up to 50 mm nominal diameter《带锥锁的记录仪器控件；1：50 到50 毫米公称口径》.pdf

JUS K T3 950-2000 Handles for gauging members with taper lock 1 50 up to 40 mm nominal diameter《带锥锁计量器控件1：50 达 40 毫米公称口径》.pdf

JUS K T3 951-1983 Handles for gauging members over 40 mm nominal diameter handles scnws and clam《计量器控件超过40 毫米 公称口径；控件，螺栓及夹具》.pdf

JUS K T3 951-2000 Handles for gauging members over 40 mm nominal diameter - Handles screws and clamps《计量器控件 超过40 毫米 公称口径 控件，螺栓及夹具》.pdf

JUS L B1 001-1982 Information processing 7bit coded character set for information interchange Basic version《信息处理 信息交互7位代码组合 基本型》.pdf