SIS SS-ISO 4873-1989 Information processing ISO 8-bit code for information interchange Structure and rules for implementation《信息处理 信息交换用ISO 8字节代码 执行结构和规则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R IEC 61249-2-4-2012 Materials for printed boards and other interconnecting structures Part 2-4 Reinforced base materials clad and unclad Polyester non-woven woven fibreglass ical.pdf

GOST R IEC 61249-2-5-2012 Materials for printed boards and other interconnecting structures Part 2-5 Reinforced base materials clad and unclad Brominated epoxide cellulose paper rees l.pdf

GOST R IEC 61249-2-6-2012 Materials for printed boards and other interconnecting structures Part 2-6 Reinforced base materials clad and unclad Brominated epoxide non-woven and wovened .pdf

GOST R IEC 61249-2-7-2012 Materials for printed boards and other interconnecting structures Part 2-7 Reinforced base materials clad and unclad Epoxide woven E-glass laminated sheetst) .pdf

GOST R IEC 61267-2001 Medical diagnostic X-ray equipment Radiation conditions for use in the determination of characteristics《医疗诊断X射线设备 特性测定中使用的辐射条件》.pdf

GOST R IEC 61309-2011 Deep-fat fryers for household use Methods for measuring the performance《家用油炸锅 性能测量方法》.pdf

GOST R IEC 61326-1-2014 Electrical equipment for measurement control and laboratory use EMC requirements Part 1 General requirements《测量 控制和实验室使用电气设备 EMC要求 第1部分 通用要求》.pdf

GOST R IEC 61326-2-6-2014 Electrical equipment for measurement control and laboratory use EMC requirements Part 2-6 Particular requirements In vitro diagnostic (IVD) medical equipm.pdf

GOST R IEC 61345-2013 Photovoltaic modules UV test for photovoltaic modules《光伏模块 光伏模块的紫外线试验》.pdf