SIS SS-ISO 6194-4-1991 Rotary shaft lip type seals Part 4 Performance test procedures《旋转轴唇型密封件 第4部分：性能试验程序》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SANS 11105-2008 Small craft - Ventilation of petrol engine and or petrol tank compartments《小艇 汽油机和 或汽油柜舱室的通风》.pdf

SANS 11108-2008 Washing pretreatment of textile fabrics《织物洗涤预处理》.pdf

SANS 1111-2008 Coal-burning appliances (reduced smoke emission type)《燃煤设备(轻烟型)》.pdf

SANS 1112-2008 Open-end box and combination wrenches《呆扳手、梅花扳手和两用扳手》.pdf

SANS 11120-1999 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3 000 l - Design construction and testing《气瓶150升～3000升水容量的可重复充装无缝钢管气瓶 设计，结构和试验》.pdf

SANS 1113-2006 Hand-operated square-drive socket wrenches《手动方形传动套筒扳手》.pdf

SANS 11135-1-2008 Sterilization of health care products - Ethylene oxide Part 1 Requirements for development validation and routine control of a sterilization process for medical d.pdf

SANS 11137-1-2007 Sterilization of health care products - Radiation Part 1 Requirements for development validation and routine control of a sterilization process for medical device.pdf

SANS 11137-2-2007 Sterilization of health care products - Radiation Part 2 Establishing the sterilization dose《保健品消毒 辐射 第2部分 确定消毒使用剂量》.pdf