SIS SS-ISO 898 5-1986 Mechanical properties of fasteners - Part 5 Set screws and similar threaded fasteners not under tensile stresses《紧固件的力学性能 第五部分：不要在拉伸应力下紧定螺钉和类似螺纹的紧固件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD EST-M3D125-A-2004 REINFORCED THERMOSET PLASTIC TO BE USED WITH FORD WSS-M99P1111-A 《增强型热固塑料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD EST-M4D139-C-2009 POLYVINYL CHLORIDE OPAQUE FLOOR MAT TO BE USED WITH FORD WSS-M99P1111-A 《聚氯乙烯不透明地板垫 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSB-M4D871-A2 FORD WSB-M4D871-A2］.pdf

FORD EST-M99J259-A-2012 DECAL PRESSURE SENSITIVE ADHESIVE TO BE USED WITH FORD WSS-M99P1111-A 《印花压敏粘合剂 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESU-M8B2500-A-2008 ANTIFREEZE MATERIALS - WINDSHIELD WASHER RESERVOIR TO BE USED WITH FORD WSS-M99P1111-A 《挡风玻璃喷洗器水箱用防冻材料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M10A54-A-2003 SINTERED IRON - STRUCTURAL (NICKEL - COPPER ADDED 1%) TO BE USED WITH FORD WSS-M99P1111-A 《结构用烧结铁（镍铜总含量1%） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M1A125-B-2002 STEEL 130 000 PSI (896 MPA) YIELD STRENGTH - SAE 4140 TO BE USED WITH FORD WSS-M99P1111-A 《屈服强度为130000 PSI（896 MPA）的SAE 4140钢 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD ESW-M1A130-B-2006 STEEL BALLS CHROME ALLOY VACUUM PROCESSED TO BE USED WITH FORD WSS-M99P1111-A 《真空加工的铬合金钢珠 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M1A150-AA-2002 STEEL BOLTS - LOW CARBON TO BE USED WITH FORD WSS-M99P1111-A 《低碳钢螺栓 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M1C115-A-2008 PETROLATUM - NLGI NO 5 GRADE - TO BE USED WITH FORD WSS-M99P1111-A 《NLGI 5级矿脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSD-M1C226-A FORD WSD-M1C226-A FORD WSD.pdf