1、 Copyright 2016 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue, White Plains, NY 10601 (914) 761-1100 Approved July 15, 2016 Page 1 of 10 pages Document Overview The SMPTE ST 2082 suite of documents defines the mapping of various source image formats onto a single-link, du
2、al-link and quad-link serial digital interface operating at a nominal rate of 12 Gb/s. This informative “roadmap” describes the documents in the SMPTE ST 2082 suite. The SMPTE ST 2082 series specify a common virtual interface that is carried on both electrical and optical physical interfaces which a
3、re also defined in the document suite. The diagram of Figure 1 illustrates a simplified Image mapping data flow roadmap for the 12G-SDI profile as defined by the ST 2082 document suite. The individual roadmaps of the SMPTE ST 2082 standards include full details of reference standards. SMPTE OV 2082-
4、0:2016 Revision of SMPTE 2082-0:2015 SMPTE OVERVIEW 12G-SDI Bit-Serial Interfaces Overview for the SMPTE ST 2082 Document Suite SMPTE OV 2082-0:2016 Page 2 of 10 pages ST 425- 6 Stereoscop ic 409 6x2 160 , 192 0 x10 80 & 204 8x1 080 Imag e Formatsinto Q ua d 3 G b / s SDIST 425- 1Source Image Format
5、 an d Ancilla ry Data Mappin gfor 3Gb/ s SD IST 425- 3Source Image Format an d Ancilla ry Data Mappi ngfor Du al Link 3Gb/ s SDIST 27 4, ST 296 , ST 428-9 , ST 42 8-19 , ST 2048-2ST 425- 5Source Image Format an d Ancill ary Da t a Mapp ingfor Quad 3G b / s SDIST 292- 1 1.5Gb/ s Signal / Da t a Seria
6、l InterfacePROPOSED216 0 -line an d 10 80 -line Stereo scopic Imag e Mapp ingfor Dua l-lin k 6 G - SDIST 2081-1 0216 0 - line and 108 0 - line Source I ma geand Ancilla ry Da t a Mapp ingfor Sin gle- link 6 G -SD IST 2081 -11216 0 - line Source Imageand Ancilla ry Da t a Mappi ngfor Du al-lin k 6 G
7、-SDIST 2081 - 12432 0 - line and 216 0 - line Source Image Mapp ing for Quad- link 6 G -SDIPROPOSED216 0-line S t ere oscopic Image Mapp ingfor Q ua d - lin k 6 G-SDISINGLEIMAGEMAPPING SSTEREOIMAGEMAPPING SMULTI-STREAMMAPPINGST 2082-1 12 Gb/s Signal/Data Serial Interface - ElectricalPROPOSED216 0-li
8、n e, 1080 - lin e an d 720- line Multi -Strea m mapp ingon a sin gle link 12G b /s interfaceST 29 7 Serial Dig i tal Fiber Tran smission Syst em PROPOSED216 0 - line and 108 0 - line Stereosco pic Image Transpo rton a sin gle link 12 G b / s in t e rf ac ePROPOSED216 0 - line Stereosco pic Image Tra
9、nspo rton a d ual link 1 2Gb/ s interfacePROPOSED432 0-line and 216 0 - line Stereosco pic Image Transpo rton a q uad link 12 G b / s in t e rf ac eST 2082 - 10216 0 - line Source Imageand Ancilla ry Da t a Mappi ngfor 12 G - SDIST 20 82 - 11432 0 - line and 216 0 - line Source Image a nd Ancillary
10、D ata Mappin gfor Du al- link 12G - SDIST 2082-1 2432 0 - line and 216 0 - line Source Image a nd Ancillary D ata Mappin gfor Quad-lin k 1 2G - SDIST 2048 - 1, ST 2 048 -1 AMD 1 , ST 428- 19 , ST 203 6 - 1768 0x 4320 , 409 6 x21 60 , 3 480 x216 0 ST 372I ma g e Fo rm a t R e f e r e n ce s1 . 5 G a
11、n d 3 G M a p p i n g R e f e r e n ce s6 G Si n g l e I ma g eM a p p i n g R e f e re n ce s409 6 x21 60 , 3480x 21 60 192 0 x 1080192 0x 1080, 128 0 x72 0, 2 048 x108 06 G S te r e o s c o p i cM a p p i n g R e f e r e n ce sFigure 1 12G-SDI Profile 1 SMPTE ST 2082-1 12 Gb/s Signal/Data Serial I
12、nterface Electrical This standard defines a bit-serial data structure, electrical signal and coaxial cable interface for the transport of signals with a total payload of 11.88 Gb/s or 11.88/1.001 Gb/s. This standard also specifies the electrical and physical characteristics of coaxial cables and con
13、nectors. SMPTE OV 2082-0:2016 Page 3 of 10 pages 2 SMPTE ST 2082-10 2160-line Source Image and Ancillary Data Mapping for 12G-SDI This standard defines the carriage of 2160-line image formats and associated ancillary data into a Single-link 12 Gb/s nominal SDI bit-serial interface as follows: MODE 1
14、: 2160-line source image formats and ancillary data into a 12 Gb/s nominal SDI bit-serial interface This standard also defines the carriage of the SMPTE ST 352 payload IDs for the single-link 12Gb/s SDI interface. 2.1 SMPTE ST 2082-10 Supported image Formats UHDTV1 and 4K Digital Cinematography Prod
15、uction Reference SMPTE Standard Image Format Signal Format Sampling Structure/pixel Depth Frame Rate ST 2036-1 3840 2160 4:2:2 (YCBCR)/10-bit 4:2:0 (YCBCR)/10-bit 50, 60/1.001 and 60 frames progressive ST 2048-1 4096 2160 4:2:2 (YCBCR)/10-bit 48/1.001, 48, 50, 60/1.001 and 60 frames progressive ST 2
16、036-1 3840 2160 4:4:4 (RGB)/10-bit 24/1.001, 24, 25, 30/1.001 and 30 Progressive ST 2048-1 4096 2160 4:4:4 (RGB), 4:4:4:4 (RGB+A)/10-bit ST 2036-1 3840 2160 4:4:4 (YCBCR) ST 2048-1 4096 2160 4:4:4 (YCBCR), 4:4:4:4 (YCBCR+A)/10-bit ST 2036-1 3840 2160 4:4:4 (RGB)/12-bit ST 2048-1 4096 2160 4:4:4 (RGB
17、)/12-bit ST 2036-1 3840 2160 4:4:4 (YCBCR)/12-bit ST 2048-1 4096 2160 4:4:4 (YCBCR)/12-bit ST 2036-1 3840 2160 4:2:2 (YCBCR)/12-bit ST 2048-1 4096 2160 4:2:2 (YCBCR)/12-bit ST 2048-1 4096 2160 4:2:2:4 (YCBCR+A)/12-bit SMPTE OV 2082-0:2016 Page 4 of 10 pages 2.2 SMPTE ST 2082-10 Document Roadmap SMPT
18、E ST 2082-10This DocumentSMPTE ST 372Dua l-L ink1.5Gb/s InterfaceSMPTE ST 274192 0 x 1 080Physical Interface DocumentsSMPTE ST 2048 -1 204 8 10 80 / 4096216 0 D-Ci nema Prod uction Imag e F o rmatSMPTE ST 2048 -2204 8 x1080 D-Ci nema Prod uction Image Form att ing for SD ISMPTE ST 12-1TimecodeS MP T
19、 E S T 2 97 S e ri al D i gi tal F i b e r Trans m issi o n Syste m f or SMPTE 259 M, S MP T E 34 4 M, S MP TE 292- 1, S MP T E 4 24 , S MPTE S T 20 81 -1 an d S MP T E S T 208 2 -1 S i gnalsS M PTE S T 2082-112Gb/s S igna l / Da ta S eria l Int erf ace - Electr icalSMPTE ST 425- 5Image Format and A
20、n cilla ry Da ta Ma ppin g f o r the Quad Lin k 3 G b/s Serial I nterfaceSMPTE ST 29 1Anci llary Data Pa cketsSMPTE ST 12 -2ATCS M PTE S T 299-1Em bedded AudioS M PTE S T 3 52Pay loa d IDLev el A Map pingLeve l B-D L M appi ngSMPTE ST 425 -1Sourc e I ma ge Format and Ancill ary Data Mapp ing for the
21、 3Gb/s Serial InterfaceS M PTE S T 2 99-2Em bedded Audio216 0- li ne Ma ppin gSMPTE ST 435-110 Gb/s SDI- Basi c Strea m Distribu tionSMPTE ST 20 36 -1UHD TV Ima geSMPTE ST 29 2-11.5 G b /s SDILeve l B-D L M appi ng Lev el A Map pingNorma tive Refere nces2ndor more Genera tion Refere ncesRefere ncing
22、 Docu mentRel ated Docu ment2 -Sa mple Interl eave Di visionSMPTE ST 205 1Two FrameMarkerSMPTE ST 2082-1 0216 0 -line a nd 108 0 -line So urce Image and An cilla ry D ata Mappin g f o r si ngle- link 12 G -SDID a ta St rea m One /Two / Thr ee / Four / Fiv e / S ix / Sev en / E ig h t216 0 -line Mapp
23、 ingSMPTE OV 2082-0:2016 Page 5 of 10 pages 3 SMPTE ST 2082-11 4320-line and 2160-line Source Image and Ancillary Data Mapping for Dual-link 12G-SDI This standard defines several mapping modes for the carriage of 4320-line and 2160-line image formats and associated ancillary data into a Dual-link 12
24、 Gb/s nominal SDI bit-serial interface as follows: MODE 1: 4320-line YCBCR 4:2:2 and 4:2:0 10-bit image formats and ancillary data on a Dual-link 12 Gb/s nominal SDI bit-serial interface MODE 2: 2160-line RGB, YCBCR 4:4:4(:4) 10-bit and 4:4:4 12-bit image formats and ancillary data on a Dual-link 12
25、 Gb/s nominal SDI bit-serial interface MODE 3: 2160-line YCBCR 4:2:2 and 4:2:0 10-bit Additional Frame Rate Source image formats and ancillary data on a Dual-link 12 Gb/s nominal SDI bit-serial interface This standard also defines the carriage of ancillary data, and the SMPTE ST 352 payload IDs for
26、the dual-link 12Gb/s SDI interface. 3.1 SMPTE ST 2082-11 Supported image Formats UHDTV2 Production Reference SMPTE Standard Image Format Signal Format Sampling Structure/pixel Depth Frame Rate Hz ST 2036-1 7680 4320 4:2:2 (YCBCR), 4:2:0 (YCBCR)/10-bit 24/1.001, 24, 25, 30/1.001 and 30 Progressive UH
27、DTV1 and 4K Digital Cinematography Production Reference SMPTE Standard Image Format Signal Format Sampling Structure/pixel Depth Frame Rate Hz ST 2036-1 3840 2160 4:4:4 (RGB), 4:4:4:4 (RGB +A)/10-bit 50, 60/1.001 and 60 Progressive ST 2048-1 4096 2160*2 4:4:4 (RGB*1), 4:4:4:4 (RGB*1+A)/10-bit 48/1.0
28、01, 48, 50, 60/1.001 and 60 Progressive ST 2036-1 3840 2160 4:4:4 (YCBCR), 4:4:4:4 (YCBCR+A)/10-bit 50, 60/1.001 and 60 Progressive ST 2048-1 4096 2160*2 4:4:4 (YCBCR), 4:4:4:4 (YCBCR+A)/10-bit 48/1.001, 48, 50, 60/1.001 and 60 Progressive ST 2036-1 3840 2160 4:4:4 (RGB)/12-bit 50, 60/1.001 and 60 P
29、rogressive ST 2048-1 4096 2160*2 4:4:4 (RGB*1)/12-bit 48/1.001, 48, 50, 60/1.001 and 60 Progressive SMPTE OV 2082-0:2016 Page 6 of 10 pages ST 2036-1 3840 2160 4:4:4 (YCBCR)/12-bit 50, 60/1.001 and 60 Progressive ST 2048-1 4096 2160*2 4:4:4 (YCBCR)/12-bit 48/1.001, 48, 50, 60/1.001 and 60 Progressiv
30、e ST 2036-1 3840 2160 4:2:2 (YCBCR)/12-bit 4:2:0 (YCBCR)/12-bit 50, 60/1.001 and 60 Progressive ST 2048-1 4096 2160*2 4:2:2 (YCBCR)/12-bit 48/1.001, 48, 50, 60/1.001 and 60 Progressive ST 2048-1 4096 2160*2 4:2:2:4 (YCBCR+A)/12-bit 48/1.001, 48, 50, 60/1.001 and 60 Progressive UHDTV1 and 4K Digital
31、Cinematography Production AFR Reference SMPTE Standard Image Format Signal Format Sampling Structure/pixel Depth Additional Frame Rates (AFR) Hz ST 2036-1 3840 x 2160 4:2:2 (YCBCR)/10-bit 4:2:0 (YCBCR)/10-bit 120 progressive 120/1.001 progressive 100 progressive ST 2048-1 4096 x 2160 4:2:2 (YCBCR)/1
32、0-bit 120 progressive 120/1.001 progressive 100 progressive 96 progressive 96/1.001 progressive Notes: *1 In this image format RGB indicates either RGB or RFSGFSBFS. An additional Color VANC packet to describe the FS characteristics is defined by SMPTE ST 2048-1. *2 This is the maximum pixel array,
33、the active image may not fill the maximum array. SMPTE OV 2082-0:2016 Page 7 of 10 pages 3.2 SMPTE ST 2082-11 Document Roadmap SMPTE ST 2082-11432 0 -line an d 21 60 -line Source Image and Anc illary Data Mappin g for dual-link 12 G -SDISMPTE ST 2082 -1 12Gb/s Signal/Da t a Seria l Interface - Elect
34、rica lSMPTE ST 297 Seria l Dig ital Fibe r Transmiss ion System f o r SMPTE 259M, SMPTE 344 M, SMPTE 29 2 an d SMPTE 424 M Sign al12G SDI Link 112G SDI Link 2SMPTE ST 291 Ancilla ry Da t a Pa ck e t an d Sp ace F o rmatt i ngST 372Du al Li nk 1.5 Gb/s Digital Interface for 192 0 x 108 0 and 204 8 x
35、10 80 Picture FormatsSMPTE ST 425-3Image Format and Ancilla ry Da t a Map ping for th e Du al L ink 3 G b /s Ser ial Interface ST 2036 - 1 Ultra High Definition Television - I mag e Param eter Value s for Program ProductionST 20 48-12048 x 108 0 and 4096 x 2160 Digital Cinematogr aphy Production Ima
36、ge Formats FS/709ST 43 5-110 Gb/s Se rial S i g nal / Da t a Interface - Pa rt 1 : Basic Stream DistributionST 425-1 Sou rce Ima ge Format and Ancilla r y Da t a Map ping for the 3 Gb/s Serial InterfaceSMPTE ST 2048-2 204 8 10 80 Di gital Cin ematogra phy Produ ction I ma ge F S/709 Formatting for S
37、eria l Dig it a l InterfaceSMPTE ST 274 192 0 x 10 80 Image Samp le Structure, D igital Rep resentation an d Digi t a l Timing Refe r e nce Sequ ence s for Multiple Picture RatesSMPTE ST 352 Pa yload Iden t ifica t ion Cod es For Serial Digital Int e rfacesSMPTE ST 299 -2 Extensio n o f the 24 -Bit
38、Digi t a l Aud io Forma t to 32 Cha nnels for 3 Gb/s Bit-Seria l InterfacesSMPTE ST 299 -1 24-Bit D igital Audio Format for SMPT E 292 Bit-Serial InterfaceSMPTE ST 12-2 Transmissio n of Time Cod e in the Ancilla ry Da t a Spac eMod e 1 4320-lin e216 0 -line Level A Ma ppingSMPTE ST 208 1-10216 0 -li
39、ne and 1080 -line Sou rce Imag e a nd Ancillary Data Mapp ing f o r sing le -link 6G-SDIMod e 2 2160-lin eMod e 3 2160 -line AF RNorma tive Re f ere nces2ndo r mor e Genera tion Refere ncesRefere ncing Docu mentRela ted Do c u mentS M PT E S T 2 0 8 2 - 1 1Th is D o cu m e n tST 2048 - 1 AMD 1Amendm
40、en t 14 SMPTE ST 2082-12 4320-line and 2160-line Source Image and Ancillary Data Mapping for Quad-link 12G-SDI This standard defines several mapping modes for the carriage of 4320-line and 2160-line image formats and associated ancillary data into a Quad-link 12 Gb/s nominal SDI bit-serial interface
41、 as follows: MODE 1: 4320-line Source image formats and ancillary data into a Quad-link 12 Gb/s nominal SDI bit-serial interface MODE 2: 2160-line YCBCR or RGB 4:4:4:4 10-bit or 4:4:4 10-bit or 12-bit Additional Frame Rate (AFR) Source image formats and ancillary data into a Quad-link 12 Gb/s nomina
42、l SDI bit-serial interface This standard also defines the carriage of ancillary data, and the SMPTE ST 352 payload IDs for the quad-link 12Gb/s SDI interface. SMPTE OV 2082-0:2016 Page 8 of 10 pages 4.1 SMPTE ST 2082-12 Supported image Formats UHDTV2 Production Reference SMPTE Standard Image Format
43、Signal Format Sampling Structure/pixel Depth Frame Rate Hz ST 2036-1 7680 x 4320 4:2:2 (YCBCR), 4:2:0 (YCBCR)/10-bit 50, 60/1.001 and 60 Progressive ST 2036-1 7680 x 4320 4:4:4 (RGB)/10-bit 24/1.001, 24, 25, 30/1.001 and 30 Progressive ST 2036-1 7680 x 4320 4:4:4 (YCBCR)/10-bit ST 2036-1 7680 x 4320
44、 4:4:4 (RGB)/12-bit ST 2036-1 7680 x 4320 4:4:4 (YCBCR)/12-bit ST 2036-1 7680 x 4320 4:2:2 (YCBCR)/12-bit 4:2:0 (YCBCR)/12-bit UHDTV1 and 4K Digital Cinematography Production AFR Reference SMPTE Standard Image Format Signal Format Sampling Structure/pixel Depth Frame Rate Hz ST 2036-1 3840 x 2160 4:
45、4:4 (RGB)/10-bit 4:4:4:4 (RGB+A)/10-bit 4:4:4 (YCBCR)/10-bit 4:4:4:4 (YCBCR+A)/10-bit 120 frames progressive 120/1.001 frames progressive 100 frames progressive ST 2048-1 4096 x 2160*2 4:4:4 (RGB*1), 4:4:4:4 (RGB*1+A)/10-bit, 4:4:4 (YCBCR), 4:4:4:4 (YCBCR+A)/10-bit 120 frames progressive 120/1.001 f
46、rames progressive 100 frames progressive 96 frames progressive 96/1.001 frames progressive ST 2036-1 3840 x 2160 4:4:4 (RGB)/12-bit, 4:4:4 (YCBCR)/12-bit 120 frames progressive 120/1.001 frames progressive 100 frames progressive SMPTE OV 2082-0:2016 Page 9 of 10 pages ST 2048-1 4096 x 2160*2 4:4:4 (
47、RGB*1)/12-bit, 4:4:4 (YCBCR)/12-bit 120 frames progressive 120/1.001 frames progressive 100 frames progressive 96 frames progressive 96/1.001 frames progressive ST 2036-1 3840 x 2160 4:2:2 (YCBCR)/12-bit 4:2:0 (YCBCR)/12-bit 120 frames progressive 120/1.001 frames progressive 100 frames progressive
48、ST 2048-1 4096 x 2160*2 4:2:2 (YCBCR)/12-bit 4:2:0 (YCBCR)/12-bit 4:2:2:4 (YCBCR+A)/12-bit 120 frames progressive 120/1.001 frames progressive 100 frames progressive 96 frames progressive 96/1.001 frames progressive Notes: *1 In this image format RGB indicates either RGB or RFSGFSBFS. An additional Color VANC packet to describe the FS characteristics is defined by SMPTE ST 2048-1. *2 This is the maximum pixel array, the active image may not fill the maximum array. SMPTE OV 2082-0:2016 Page 10 of 10 pages 4.2 SMPTE ST 2082-12 Document Roadmap SMPTE ST 2082-12432 0 -
