SNI 01-4456-1998 Alcoholic beverages《酒精饮料》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 4240-1980 Electroplated Coating of Bolts Screws and Nuts《螺栓、螺钉、螺帽之电镀层》.pdf

CNS 4241-1978 Method of Test for Electroplated Coating of Bolts Screws and Nuts《螺栓、螺钉、螺帽电镀层之检验法》.pdf

CNS 4242-1978 Widths Across Flats and Widths Across Corners for Bolts Screws and Nuts《螺栓、螺钉、螺帽之对面宽度及对角宽度》.pdf

CNS 4243-1978 Radius Under Head for Bolt Screws《螺栓、螺钉之头下内圆角半径》.pdf

CNS 4244-1987 Hexagon Screws and Nuts-Heights of Heads and Thicknesses of Nuts《六角头螺钉头高及六角螺帽厚度》.pdf

CNS 4245-1978 Clearance Holes for Metric Bolts (1 6 up to and Including 150 mm Thread Diameter)《穿通孔径（螺纹直径1 6公厘　150公厘）》.pdf

CNS 4246-1980 Knurled Thumb Screws《辊纹扭头螺钉》.pdf

CNS 4247-1980 Flat Knurled Thumb Screws《辊纹扭头平螺钉》.pdf

CNS 4248-1980 Slotted Knurled Thumb Screws《有槽辊纹扭头螺钉》.pdf