SNI 03-1753-1990 Coarse aggregates for concrete Determination of fine grain smaller than 70 mikron《混泥土粗料 颗粒尺寸小于70微米测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE MA 2121-1987 Hose Assembly Convoluted Nonmetallic TFE Flareless Straight to 45 Degrees《盘绕的、非金属的、TFE、非扩口、直对45、软管组件》.pdf

SAE MA 2122-1987 Hose Assembly Convoluted Nonmetallic TFE Flareless Straight to 90 Degrees《盘绕的、非金属的、TFE、非扩口、直对90、软管组件》.pdf

SAE MA 2123-1987 HOSE ASSEMBLY CONVOLUTED NONMETALLIC TFE FLARELESS 45 O 45 《盘绕的、非金属的、TFE、非扩口、45对45、软管组件》.pdf

SAE MA 2124-1987 HOSE ASSEMBLY CONVOLUTED NONMETALLIC TFE FLARELESS 45 O 90 《盘绕的、非金属的、TFE、非扩口、45对90、软管组件》.pdf

SAE MA 2125-1987 HOSE ASSEMBLY CONVOLUTED NONMETALLIC TFE FLARELESS 90 O 90 《盘绕的、非金属的、TFE、非扩口、90对90、软管组件》.pdf

SAE MA 2126B-2005 Hose Assembly Polytetrafluoroethylene (PTFE) up to 232 and 10 500 kPa Procurement Specification Metric (ISO DIS 10502)《米制、232℃和10 500 kPa及以下的聚四氟乙烯软管组件采购规范》.pdf

SAE MA 2150 1-1991 CLAMP LOOP STYLE CUSHIONED WITH WEDGE HYDROCARBON FLUID RESISANT METRIC《耐烃基液体的、带楔槽垫片的环状卡箍（米制）》.pdf

SAE MA 2150 2-1991 CLAMP LOOP STYLE CUSHIONED WITH WEDGE PHOSPHATE ESTER FLUID RESISANT METRIC《耐磷酸酯基液体的、带楔槽垫片的环状卡箍（米制）》.pdf

SAE MA 2150 3-1991 CLAMP LOOP STYLE CUSHIONED WITH WEDGE HIGH TEMPERATURE METRIC《带楔槽垫片的高温环状卡箍（米制）》.pdf