SNI 03-7043-2004 Methods of hydraulic design for permanent dam construction with energy absorber type MDL《永久水坝建筑与能量转换器MDL型的液压计算方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS9436-1962 BOLT TEE HEAD - AMS 5735 CHAMFERED 4375-20 UNJF-3A《AMS 5735型三通头螺栓的0 4375-20 UNJF-3A型倒角》.pdf

DLA MS9437 NOTICE 1-1996 BOLT TEE HEAD - AMS 5735 CHAMFERED 500-20 UNJF-3A《AMS 5735型三通头螺栓的0 500-20 UNJF-3A型倒角》.pdf

DLA MS9437-1962 BOLT TEE HEAD - AMS 5735 CHAMFERED 500-20 UNJF-3A《AMS 5735型三通头螺栓的0 500-20 UNJF-3A型倒角》.pdf

DLA MS9438 REV B-1995 SCREW MACHINE-STEEL AMS 6304 DIFFUSED NICKEL- CADMIUM PLATED HEXAGON HEAD DRILLED 138-40 UNJF-3A《AMS 6304型钢螺杆机的0 138-40 UNJF-3A型六边钻头镍镉电镀螺杆》.pdf

DLA MS9439 REV A (1)-2003 SCREW MACHINE-STEEL AMS 6304 DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD DRILLED 164-36 UNJF-3A《AMS 6304型钢螺杆机的0 138-36UNJF-3A型六边钻头镍镉电镀螺杆》.pdf

DLA MS9439 REV A VALID NOTICE 1-2001 SCREW MACHINE-STEEL AMS 6304 DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD DRILLED 164-36 UNJF-3A《AMS 6304型钢螺杆机的0 138-36UNJF-3A型六边钻头镍镉电镀螺杆》.pdf

DLA MS9439 REV A-1972 SCREW MACHINE-STEEL AMS 6304 DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD DRILLED 164-36 UNJF-3A《AMS 6304型钢螺杆机的0 138-36UNJF-3A型六边钻头镍镉电镀螺杆》.pdf

DLA MS9443 (1)-2003 BOLT MACHINE - STEEL AMS 6304 DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD DRILLED 375-24 UNJF-3A《AMS 6304型钢锚杆机的0 375-24 UNJF-3A型六边钻头镍镉电镀螺杆》.pdf

DLA MS9443 NOTICE 1-1996 BOLT MACHINE - STEEL AMS 6304 DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD DRILLED 375-24 UNJF-3A《AMS 6304型钢锚杆机的0 375-24 UNJF-3A型六边钻头镍镉电镀螺杆》.pdf