SNI 04-4519 2-1998 Environmental tests - Part 2 Tests Salt mist《环境试验 第2部分 测试 盐薄雾》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 29526-2013 通用粉体加工技术 术语.pdf

GB T 29527-2013 通用粉体加工设备图形标记.pdf

GB T 29528-2013 阀门用铜合金锻件技术条件.pdf

GB T 29529-2013 泵的噪声测量与评价方法.pdf

GB T 29530-2013 平开门和旋转门 抗静扭曲性能的测定.pdf

GB T 29531-2013 泵的振动测量与评价方法.pdf

GB T 29532-2013 钢质精密热模锻件 通用技术条件.pdf

GB T 29533-2013 钢质模锻件材料消耗工艺定额编制方法.pdf

GB T 29534-2013 温锻冷锻联合成形锻件 通用技术条件.pdf