SNI 05-4389-1996 Support blocks moulds for plastics《塑料模具 支撑模板》.pdf

相关资源

JB T 6057-1992 塑料模具成型部分用钢及其热处理技术条件.pdf

HB 6841-1993 塑料模具型腔表面粗糙度样块和塑料样板技术要求及评定方法.pdf

QJ 841-1984 塑料模具及其零件通用技术条件.pdf

YB T 107-1997 塑料模具用热轧厚钢板.pdf

YB T 107-2013 塑料模具用热轧钢板.pdf

YB T 094-1997 塑料模具用扁钢.pdf

JB T 6057-1992 塑料模具成型部分用钢及其热处理.技术条件.pdf

CSN 69 0030-1990 Machines for rubber and plastics moulding Safety regulations Common provisions《橡胶和塑料模具机器安全条例 通用规则》.pdf

IRAM 13 309-1962 《塑料 确定在酚醛塑料模具中游离氨及含氨化合物的含量的测定方法》.pdf

SNI 05-4242-1996 Shouldered ejector pins of mould for plastics《塑料模具 带肩推杆》.pdf

猜你喜欢

CNS 11559-1986 Method of Test for Oil Putty《油性补土检验法》.pdf

CNS 11560-1986 Method of Test for Oil Surfacer《油性二度底漆检验法》.pdf

CNS 11561-1986 Method of Test for Oil Primer Surface《油性中涂底漆检验法》.pdf

CNS 11562-1986 Method of Test for Red-Lead Zinc Chromate Anticorrosive Paint《红丹锌铬黄防锈底漆检验法》.pdf

CNS 11563-1986 Method of Test for Anticorrosive Primer for General Use《一般用防锈底漆检验法》.pdf

CNS 11564-1986 Method of Test for Lead Suboxide Anticorrosive Paint《一氧化二铅防锈底漆检验法》.pdf

CNS 11565-1986 Method of Test for Chlorinated Rubber Red Lead Anti-Corrosive Primer《氯化橡胶系红丹防锈底漆检验法》.pdf

CNS 11566-1986 Method of Test for Chlorinated Rubber Zinc Chromate Anticorrosive Primer《氯化橡胶系锌铬黄防锈底漆检验法》.pdf

CNS 11567-2005 Architectural drawing《建筑制图》.pdf