SNI 06-2558-1992 Technical grade dalapon Specification and test method《工业级茅草枯 规范与测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 3673C-2011 Cloth Glass Aluminum Face Silicone Rubber Back《硅橡胶背铝面玻璃布》.pdf

SAE AMS 3677A-2011 Fabric Polybenzimidazole (PBI) Polyamide Fiberglass Polytetrafluoroethylene (PTFE) Impregnated Sintered《烧结和聚四氟乙烯(PTFE)浸渍的聚苯并咪唑(PBI)聚酰胺玻璃纤维织物》.pdf

SAE AMS 3678 10A-2010 Type 10 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 15% Carbon Fiber《10类童式聚四氟乙烯(PTFE)模型或者半成品含有15%的碳纤维》.pdf

SAE AMS 3678 11-2010 Type 11 10% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《11型 10%芳香族聚合物填充原聚四氟乙烯(PTFE)模制品或挤压制品》.pdf

SAE AMS 3678 12-2010 Type 12 10% Mineral 2 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《12类10%的矿物 2 5%二硫化钼填充处女聚四氟乙烯(PTFE)模型或半成品》.pdf

SAE AMS 3678 13-2010 Type 13 10% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《13类10%聚酰亚胺填充童式聚四氟乙烯(PTFE)模型或者半成品》.pdf

SAE AMS 3678 14-2010 Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《类型14的40%铜填充聚四氟乙烯(PTFE)模型或挤压件》.pdf

SAE AMS 3678 15-2010 Type 15 15% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《15类 15%聚酰亚胺填充童式聚四氟乙烯(PTFE)模型或者半成品》.pdf

SAE AMS 3678 16-2010 Type 16 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《16型 15%聚酰亚胺填充原聚四氟乙烯(PTFE)模制品或挤压制品》.pdf