SNI 06-6855-2002 Test methods of manganese (Mn) content in water by colorimetry with persulphate reagent《用与过硫酸钾试剂比色法测试水中锰(Mn)含量的方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM ISO 8327-1988 Information processing systems Open Systems Interconnection basic connection oriented session protocol specification《信息处理系统 开放系统互连 面向基本连接的对话协议规范》.pdf

ONORM ISO 841-1994 Numerical control of machines Axis and motion nomenclature《数控机床 坐标和运动方向的命名》.pdf

ONORM ISO 8573-1-1992 Compressed air for general use Contaminants and quality classes《一般用途的压缩空气 杂质和质量等级》.pdf

ONORM ISO 8665-1989 Small craft marine propulsion engines and Systems power measurements and declarations《小艇；船舶推进引擎和系统 功率测量和说明》.pdf

ONORM ISO 883-1987 Indexable hardmetal (carbide) inserts with rounded corners without fixing hole dimensions《无固定孔的圆角可转位硬质合金(碳化物)刀片 尺寸》.pdf

ONORM ISO 898 Teil 1-1989 Mechanical properties offasteners bolts screws and studs《紧固件的机械性能 螺栓；螺钉及柱头螺栓》.pdf

ONORM ISO 898 Teil 2-1981 Mechanical properties of fasteners Nuts with specified proof load values《紧固件的机械性能 具有规定检验荷载值的螺母》.pdf

ONORM ISO 898 Teil 6-1990 Mechanical properties offasteners nuts with specified proofload values finepitch thread《紧固件的机械性能 有规定检验载荷值的螺母 细牙螺纹》.pdf

ONORM ISO 9000-3-1992 Quality management and quality assurance Standards - Guidelines for the application of ISO 9001 to the development supply and maintenance of Software《质量管理及质量确.pdf