SNI 10-4831-1998 Sizes of international shore fitting flange for fire extinguishers in ships《用于船舶灭火器的国际岸装法兰的尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST ISO 7781-2013 Raw styrene-butadiene rubber Determination of soap and organic-acid content《未加工丁苯橡胶 肥皂和有机酸性含量的测定》.pdf

GOST ISO 7785-1-2011 Dental handpieces Part 1 High-speed air turbine handpieces《手持式牙科器械 第1部分 高速气动涡轮手持式器械》.pdf

GOST ISO 7785-2-2011 Dental handpieces Part 2 Straight and geared angle handpieces《手持式牙科器械 第2部分 直角和弯角手持式器械》.pdf

GOST ISO 7800-2013 Metallic materials Wire Simple torsion test《金属材料 线材 单向扭转试验》.pdf

GOST ISO 7864-2011 Sterile hypodermic needles for single use《一次性使用无菌皮下注射器》.pdf

GOST ISO 7886-3-2011 Sterile hypodermic syringes for single use Part 3 Auto-disable syringes for fixed-dose immunization《一次性使用无菌皮下注射器 第3部分 固定剂量免疫接种用自动报废注射器》.pdf

GOST ISO 7886-4-2011 Sterile hypodermic syringes for single use Part 4 Syringes with re-use prevention feature《无菌皮下注射器 第4部分 带防止重复使用功能的注射器》.pdf

GOST ISO 7902-1-2001 Hydrodynamic plain journal bearings under steady-state conditions Circular cylindrical bearings Part 1 Calculation procedure《稳定桩体条件下使用的液体动压普通轴颈轴承 圆筒轴承 第1部分 计算方.pdf

GOST ISO 7914-2012 Forestry machinery Portable chain-saws Minimum handle clearance and sizes《林业机械 手提式链锯 最小手柄间隙和尺寸》.pdf